Valkyrie Riders Cruiser Club
June 28, 2025, 06:11:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Valve Cover Sealant
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Valve Cover Sealant  (Read 1012 times)
Bob D
Member
*****
Posts: 54

Las Vegas, Nevada
« on: March 23, 2018, 11:34:53 AM »
I just adjusted my valves (2001 Standard) and bought a new set of gaskets. My Honda Service manual says to use Three Bond 1521 sealant. Is this specific type really necessary or is there a substitute to avoid an on-line order? I searched previous threads but nothing on valve cover sealant. Thanks in advance!
Logged
Houdini
Member
*****
Posts: 1975


VRCC #28458 - VRCCDS#144

Allen, TX
« Reply #1 on: March 23, 2018, 11:36:40 AM »
Any high-heat sealant will work.
Logged
"A Camera And A Bike....What More Do I Need?
Chrisj CMA
Member
*****
Posts: 14769


Crestview (Panhandle) Florida
« Reply #2 on: March 23, 2018, 11:42:32 AM »
You only put tiny dabs of sealant on the four square landings, one on each side of the cam at each end the rest of the gasket is installed dry.
Logged
SCain
Member
*****
Posts: 620


Rio Rancho, NM
« Reply #3 on: March 23, 2018, 11:42:49 AM »
I've never used a sealant on a valkyrie valve cover, removed many and the only thing I have ever used was a a small dab of hondabond or = in the corners. I wouldn't use anything in case they need to come off again for some reason.
My .02
Logged
Steve
Bob D
Member
*****
Posts: 54

Las Vegas, Nevada
« Reply #4 on: March 23, 2018, 12:01:12 PM »
Thanks for the input. I'll just grab some Hondabond from my local dealer.
Logged
98valk
Member
*****
Posts: 13468


South Jersey
« Reply #5 on: March 23, 2018, 04:01:47 PM »
this is all u need
 https://www.permatex.com/products/gasketing/gasket-sealants/permatex-form-a-gasket-no-2-sealant/

No 1 is not flexible so only No 2.
Logged
1998 Std/Tourer, 2007 DR200SE, 1981 CB900C  10speed
1973 Duster 340 4-speed rare A/C, 2001 F250 4x4 7.3L, 6sp

"Our Constitution was made only for a Moral and Religious people. It is wholly inadequate to the goverment of any other."
John Adams 10/11/1798
Bob D
Member
*****
Posts: 54

Las Vegas, Nevada
« Reply #6 on: March 24, 2018, 07:08:05 AM »
Thank you!
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS