Valkyrie Riders Cruiser Club
June 24, 2025, 10:27:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Pages: [1]   Go Down
Send this topic Print
Author Topic: Amp draw  (Read 1472 times)
turtle254
Member
*****
Posts: 425

Livingston,Texas


« on: March 18, 2019, 12:38:41 PM »

Any one know what Amp draw is with key on, not started.
Mine is  8amps with lights and 5.5amps with them disconnected .
Seems to me to be awful high? 98 std. Will run the battery down real quick.   
Logged
Hook#3287
Member
*****
Posts: 6430


Brimfield, Ma


« Reply #1 on: March 19, 2019, 01:40:25 AM »

That's a question I don't recall seeing before, amp draw before starting.

Any added accessories?

After taking the headlight 2.5 amps out, what's left?  Meters and taillight pretty much it on a standard/tourer.  No way they pull 5.5

Time for wire chasing.
Logged
turtle254
Member
*****
Posts: 425

Livingston,Texas


« Reply #2 on: March 19, 2019, 11:28:26 AM »

2.5 = headlights
5.5 all else
3.5 tail meter fuse only = 1.75 tail lights + 1.75 front bucket
---------
2 amps all else
seems reassemble  balanced, but high all over
used two different meters
Total draw is about 8 amps … key on , not started.   
Logged
savy265
Member
*****
Posts: 31


« Reply #3 on: March 20, 2019, 03:12:13 PM »

standard  draw should  be . 025  or up  to .050 . accordance  with  my  owners manual 
Logged
turtle254
Member
*****
Posts: 425

Livingston,Texas


« Reply #4 on: March 21, 2019, 12:24:09 PM »

2.5 = headlights
5.5 all else
3.5 tail meter fuse only = 1.75 tail lights + 1.75 front bucket
---------
2 amps all else
seems reassemble  balanced, but high all over
used two different meters
Total draw is about 8 amps … key on , not started.  
\
OK
Rated at
---------------------------------------------------------------------------
3 - 1157 bulbs on tail @ .59amps lower filament = 1.77 amps + lic. plate =1.8
headlight = 2.23amps + fog lights(2) 1.75 = 4amps
two turn/run front bulbs 1157 = 1.75 amps
gage light + small misc. + ignition = .5amps
This equals 8.2
_______________________________________________

That's 8.2 amps, so mine showing at  8 amps must be "OK",
even thou every one is telling me that's too high.
« Last Edit: March 21, 2019, 02:52:09 PM by turtle254 » Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: