dead coil 1and 2 plugs

[slider]

where does power that feeds coils  hook up to coils from??Have a coil not getting power to either post..ground is good     coil is not firing.Does not appear to be getting power  on either terminal  on top of coil.

[jdp]

Wish I could help you and I noticed a lot of people have read this but no one said anything, my best bet would be to buy a shop manual, I’ve fixed almost everything I needed to fix with it, good luck brother

[gordonv]

PDF of service manual.

http://valkyrienorway.com/download.html

Easier to carry on trips. I use the paper one while working on the bike. PDF while searching on the computer to figure out how-to.

[Ricky-D]

"Powering the coils" is an ECM function.

***

[Bigwolf]

where does power that feeds coils  hook up to coils from??Have a coil not getting power to either post..ground is good     coil is not firing.Does not appear to be getting power  on either terminal  on top of coil.

When the key is on, the black with white stripe wire should be showing 12 volts or more (depends on battery strength).  Neither terminal should show ground unless the engine is running!  The ignition module (ecm) provides the ground in accordance with proper timing.