Headlight adjustment on I/S

[Mr.BubblesVRCCDS0008]

 I need alittle help trying to adjust my headlights after installing new 13in progessive shocks. I've got a manuel and tried turning the lower screws but they don't seem to change anything. Any and all help will be appreciated.  TIA

[sugerbear]

it's a nkurled knob, kinda hard to get to esp if ya got big hands.  look again and make sure, turn with the hand not a screwdriver.
theres two on each bottom and side.
may have to remove a few parts to get in there, or, get the wife,sig other, etc to help.
hope i'm not talking down to ya, but it really is tight in there, and sound like your not turning the right thing.

of course i've been very wrong before

[Mr.BubblesVRCCDS0008]

I know there is two big gray plastic knobs at the top of the headlamp assembly. The book says those are for vertical adj. and the lower two knobs have a bolt head and a notched washer are for horizonal adj.  I may take the faring off tomorrow and put an eyeball on all the knobs and all.

[3W-lonerider]

when i had to adjust my headlight on my i/s. it's just those 2 gray knobs. one is for vertical and one for horizontal. the whole headlight assembly moves as one there is no adjustment for each bulb. can't remember which is which is which though. what i did was start turning one and keep and eye on the light. keep track of how many times you turn the knob. so if it happens to be the wrong one you can turn it back to where it was.