Needing One of my Carbs Sync.
dan7uk:
Had a vacuum leak on #5 carb, fixed the leak now I need to sync #5 to #3. Don't want to buy a gauge for a one time check, I'm too cheap. I did run the sync screw in on #1 counting the turns until it lightly seeded, matched turns in to #5 to get in the ballpark but I would feel better if it was sync. I live in Louisville Ky anyone have a sync gauge that I could use, ride to you and so I could check my sync on #5?
WintrSol:
Bit of a ride from Louisville to St.Louis, but if no one closer responds, I have a DigiSync, and will help out.
dan7uk:
Thanks for the offer, a bit too far. I may have to break down and buy a Digi Sync.
98valk:
Quote from: dan7uk on August 17, 2025, 03:17:01 AM
Thanks for the offer, a bit too far. I may have to break down and buy a Digi Sync.
I have two sets of vacuum gauges I can sell you. one set I never used. the other set used on my '81 cb900 one time.
WintrSol:
The main benefit of the DigiSync is you can verify the other carbs are as close as you thing they are. The downside is you rarely use it for the $$$ one costs. I'm one of those guys who says 'he who has the most tools wins'; I also offer to help others sync their bikes, so it does get use more often.
An, yes, too hot to ride from Louisville, unless you like long trips after sundown.
Navigation
[0] Message Index
[#] Next page