Valkyrie Riders Cruiser Club
September 08, 2010, 07:46:49 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link f6rider link
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Woodys fairings
Valkyrie Riders Cruiser Club > General > Tech Board > Purge tubes and air cleaner housing
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Purge tubes and air cleaner housing  (Read 296 times)
hardluckrodeo
Member
*****
Posts: 14


Houston, Texas
« on: March 18, 2010, 12:01:39 PM »
Do I get an unobstructed view of the purge tubes by removing the air cleaner housing?  I replaced intake O-rings to correct what I thought was creating a slight gas leak.  I still have a slight gas leak.  It looks like two of these purge tubes are not hooked up but I can't reach them.  Could this be my gas leak?  They look like they could stand to be replaced.
Logged
Mr.BubblesVRCCDS0008
Member
*****
Posts: 937

Huffman, Texas close to Houston
« Reply #1 on: March 18, 2010, 03:17:03 PM »
Hardluck  I'm just northeast  of houston  over by humble.There is two vent tubes that come off carb banks that do not hook to anything. If you need any help give me a holler. Check the weap hole on the bottom of the fuel peacock, if the diaphram has ahole in it it with drip fuel from there.
Logged
hardluckrodeo
Member
*****
Posts: 14


Houston, Texas
« Reply #2 on: March 19, 2010, 06:09:46 AM »
looking for replacing purge tubing 3/16...autoparts doesn't have it.  any ideas?  BTW i'm in humble also...
Logged
cutter
Member
*****
Posts: 370


First Company in... Last Company out! VRCCDS0234

Magnolia, Texas
« Reply #3 on: March 19, 2010, 07:42:56 AM »
I just replaced some vac lines on mine this past weekend when I replaced the air filter. I did remove the air box to get at them and cleaned the box too. Down tubes had an oil film. I got the lines from the the Honda shop. Less than a buck a foot, right size and no hassel matching up at the auto store.
I'm between Tomball and The Woodlands.
Logged
On your tombstone there is a dash between the day you were born and the day you die. Make that dash count.
hardluckrodeo
Member
*****
Posts: 14


Houston, Texas
« Reply #4 on: March 19, 2010, 08:52:45 AM »
That's good to know.  I figured the Honda shop would want a first born child or left nut for them.
Logged
Mr.BubblesVRCCDS0008
Member
*****
Posts: 937

Huffman, Texas close to Houston
« Reply #5 on: March 20, 2010, 04:38:27 AM »
Hardluck since you know where Humble is I'll tell you I live in Huffman not too many people know where Huffman is as we're just a small bedroom community. I'm at work today if you want to give me a call at  713 818- 9703 maybe we can meet up sometime. Smiley
Logged
Chrisj CMA
Member
*****
Posts: 1731


Crestview (Panhandle) Florida
« Reply #6 on: March 20, 2010, 06:10:01 AM »
The vacuum line at the Honda shop may be the OEM line that is single wall and subject to cracking.  THen whole reason that got us to start changing these things out.  Many desmog to get rid of vacuum lines altogether, I did not I use 5/32 fuel line from autozone.  Its double wall and a tighter fit than the owm so you dont need those pesky clamps.  If you are going to do the job and do it the long hard way of removing the airbox as well......make sure youre not putting crappy OEM vacuum lines back on that wont last a couple years before they start cracking again
Logged
Pages: [1]   Go Up
Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC MySQL | PHP | XHTML | CSS