Passenger footpegs

[Art708]

 If anyone has a set of stock passenger footpegs that they would sell cheap..... well, you know what I mean. Thanks ......
                             Art

[deadvelvet]

what do you have now?

[Art708]

what do you have now?

  Cobra floorboards. They push the center stand down a couple of inches when they are down....makes it drag.

[DFragn]

what do you have now?

 Cobra floorboards. They push the center stand down a couple of inches when they are down....makes it drag.

Yup, that's why I bit the bullet with the Rivco adjustables. 'Cause I didn't want to sacrifice either items. I'm only able to use 4 of the 6 positions because the top one hits the bag and the lower the C-Stand.
Sorry, if I still had the p-pegs I'd send 'em to you.

[Art708]

what do you have now?

 Cobra floorboards. They push the center stand down a couple of inches when they are down....makes it drag.

Yup, that's why I bit the bullet with the Rivco adjustables. 'Cause I didn't want to sacrifice either items. I'm only able to use 4 of the 6 positions because the top one hits the bag and the lower the C-Stand.
Sorry, if I still had the p-pegs I'd send 'em to you.

Thanks..  I can't see myself spending a lot of money for the adjustable ones. I don't ride 2-up very often so a set of stock pegs will work for me.

[Old Geezer Richard]

Just out of curiosity how much were those adj. foot pads ... I had thought about trying to fab my own , but thats about how far I got .... My wifey is not comfortable with the kuri foot pegs on there now her heel goes numb sometimes ...

[DFragn]

Just out of curiosity how much were those adj. foot pads ... I had thought about trying to fab my own , but thats about how far I got .... My wifey is not comfortable with the kuri foot pegs on there now her heel goes numb sometimes ...

About $350.00. Although Rivco no longer makes them available for the Valk anymore as a common item. They do occasionally make a fresh production run. The last was a few months ago and they no longer list them on their eBay site.
I think they've only mad a few production runs in the last several years.

You could call 'em and see if they do have a set.  http://www.rivcoproducts.com/

[MP]

I believe $425

MP

[humshark]

I think I have a set around as spare.  If not, I definitely have the set on the bike.  How much to swap?

[humshark]

How much to swap?

In other words, do you want to trade?  If so how much are you looking for?

[IamGCW]

Transformer II Passenger Floorboards are now out for the Valk's.  I just got a set and installed them in 20 minutes.  They have three mount locations on the board (front to rear) to allow for different bags.  Fit and finish is good.  With the adapters it was around $260 at my front door.

http://www.kuryakyn.com/index.cfm/go/Home.ProductDetail/IMID/3881

[Cattman]

Which # adaptors did you use and are they mounted to the existing peg mounts?

[Art708]

 To get back to my original post.......  I've bought a set of stock pegs..... I think.

[IamGCW]

Adapters 8818.
Boards 4380.

They mount into the existing peg mounts.

Kury listed 8826 adapters but they did not fit.  Local dealer had the 8818 on the shelf.