galleto
Member
    
Posts: 48
Unless you ride the BEAST,you wouldn´t understand
Irapuato, Gto " Mexico "
|
 |
« on: May 16, 2012, 08:50:15 AM » |
|
Folks good morning. I would like to bid for a saddle back rails that are in action, but I am not quitly sure if this will fit in my valkyrie tourer 1998, per seller coment there is for a interstate by I am not sure. I already contacted the seller but he is not sure.
PLZ HELP
Here is the link
may Thanks
http://www.ebay.com/itm/190679264864?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
|
|
|
|
|
Logged
|
“ Dream as if you will live forever… Live as if you will die tomorrow "
|
|
|
hubcapsc
Member
    
Posts: 16824
upstate
South Carolina
|
 |
« Reply #1 on: May 16, 2012, 09:06:05 AM » |
|
Those look like the OEM knock-offs that have been showing up on eBay for the last couple of years.
People report being generally happy with them, especially recently. Some people report having to wrestle with them a bit to get them to line up, but when they're on, they pretty much look like OEM saddlebag rails. At first some folks reported theirs wouldn't line up right, and looked crooked after installation, since then people have said this problem seems to be corrected...
They should fit any Valkyrie with OEM saddlebags.
I don't have a set, have never actually seen them.
-Mike
|
|
|
|
|
Logged
|
|
|
|
|
BF
|
 |
« Reply #2 on: May 16, 2012, 09:09:34 AM » |
|
The original OEM Honda saddlebag rails will fit the Standard, Tourer and the Interstate. To answer your question, yes, they should fit your bike.
|
|
|
|
|
Logged
|
I can't help about the shape I'm in I can't sing, I ain't pretty and my legs are thin But don't ask me what I think of you I might not give the answer that you want me to 
|
|
|
Jabba
Member
    
Posts: 3563
VRCCDS0197
Greenwood Indiana
|
 |
« Reply #3 on: May 16, 2012, 09:09:59 AM » |
|
I am watching that auction as well.
We should coordinate and not bid each other up.
If you're SERIOUS about it, let me know... and I'll back off it.
I am willing to go about $200. I seriously doubt that's enough to buy them though. If you're really wanting them, say so and I'll not bid.
Jabba
|
|
|
|
|
Logged
|
|
|
|
galleto
Member
    
Posts: 48
Unless you ride the BEAST,you wouldn´t understand
Irapuato, Gto " Mexico "
|
 |
« Reply #4 on: May 16, 2012, 09:34:15 AM » |
|
Thanks all of you for feedback and comments
Jabba I really want this item, however my max offert will be 170 USD, if the auction go over this quantity and will not continue bidding Regards
|
|
|
|
|
Logged
|
“ Dream as if you will live forever… Live as if you will die tomorrow "
|
|
|
|
big d
|
 |
« Reply #5 on: May 16, 2012, 10:05:56 AM » |
|
those bag rails will fit all valks.already installed them on a tourer and an interstate. will be installing another set on another tourer next weekend. fit and finish is as good as the oem and the chrome finish is excellent. good luck
|
|
|
|
|
Logged
|
|
|
|
|
tank_post142
|
 |
« Reply #6 on: May 16, 2012, 11:09:51 AM » |
|
check the sellers feedback profile, you'll see these rails selling fro a low of 250.00 to a high of 656.00 they seem to sell mostly in the 350.00 range
|
|
|
|
|
Logged
|
I got a rock  VRCCDS0246 
|
|
|
Gavin_Sons
Member
    
Posts: 7109
VRCC# 32796
columbus indiana
|
 |
« Reply #7 on: May 16, 2012, 12:55:40 PM » |
|
They will fit. I have a set on my 01 interstate. Be prepared to pay up to 500 bucks. Seen more than one pair go over 400. I was lucky enough to get mine at a dirt cheap price or i wouldnt have them now. The last minute of auction is when all the bids come in.
|
|
|
|
|
Logged
|
|
|
|
|
Jess Tolbirt
|
 |
« Reply #8 on: May 16, 2012, 01:19:52 PM » |
|
yep the seller seems to change his name a lot but i had them on two of my bikes and they look great, i just had to tweak them a bit to square them up but wasnt hard to do..
|
|
|
|
|
Logged
|
Valkyrie member # 23084 Started out on old forum on day one but lost my member number.
|
|
|
|
Paxton
|
 |
« Reply #9 on: May 16, 2012, 01:44:07 PM » |
|
Galleto and Jabba;As of now, I am the highest bidder on this item... a couple of bucks below $170. ??? My best offer was to be $290, but I'll stop bidding so you gentlemen can have a shot at them. Well, I just went ahead and purchased the set of Valkyrie Custom V Velocity Stacks BLING; and the RIVCO jack adapter. Those two just eat up the cash that was intended for the rails. Honestly, I’m scared of my expensive dreams… they tend to become reality!  Good luck! Paxton.
|
|
|
|
|
Logged
|
J. Paxton Gomez
1966 First year Bronco... 302 CI V8 1975 First year Chrysler Cordoba... 360 CI V8 1978 Honda 750F / Cafe Racer 2000 GL1500CY Fast-Black Standard Solo Rider
So Cal... 91205
"Four wheels move the body; two wheels move the soul."
|
|
|
steve 3054
Member
    
Posts: 672
VRCC # 34853
Sanford,Fl. 352-267-1553
|
 |
« Reply #10 on: May 16, 2012, 07:33:11 PM » |
|
I bought a set, and was happy with them, paid $375...same guy, must have had them made in China. I had to supply the bolts thru the bottom of the bags, ( they were not included). Shipping somewhat slow , but cheap!!!
|
|
|
|
|
Logged
|
Be polite. Be professional. But, have a plan to kill everyone you meet.
|
|
|
|
Phil57
|
 |
« Reply #11 on: May 17, 2012, 05:07:05 PM » |
|
Someone paid 306.70 anyone we know?
|
|
|
|
|
Logged
|
|
|
|
|
Momz
|
 |
« Reply #12 on: May 17, 2012, 06:32:18 PM » |
|
I'll be glad to sell a set of new OEMS for $495.00. If interested, PM me.
|
|
|
|
|
Logged
|
 ALWAYS QUESTION AUTHORITY! 97 Valk bobber, 98 Valk Rat Rod, 2K SuperValk, plus several other classic bikes
|
|
|
|
Paxton
|
 |
« Reply #13 on: May 17, 2012, 07:18:17 PM » |
|
Momz; Are you including the Saddlebags? 
|
|
|
|
|
Logged
|
J. Paxton Gomez
1966 First year Bronco... 302 CI V8 1975 First year Chrysler Cordoba... 360 CI V8 1978 Honda 750F / Cafe Racer 2000 GL1500CY Fast-Black Standard Solo Rider
So Cal... 91205
"Four wheels move the body; two wheels move the soul."
|
|
|
|
Phil57
|
 |
« Reply #14 on: May 17, 2012, 07:30:19 PM » |
|
That would be a deal. The new IS doesn't have them we might have to talk. Dead ass broke right now. Not sure we will make it by Saturday George this trip is going to be the limit as it is. I would like to see your work shop I'll give you a shout if I can do it. It's going to be in the 80 Saturday wish we could go foe a ride. It will happen just got to get this body working again. Brand new hmmm
|
|
|
|
|
Logged
|
|
|
|
|
Momz
|
 |
« Reply #15 on: May 17, 2012, 07:41:14 PM » |
|
PaxtonI might get you a set of saddlebags for around $1200.00, but they'd be used. No kidding around either.  I've sold many Valk parts and accesories on our classifieds, all without a single complaint. 
|
|
|
|
|
Logged
|
 ALWAYS QUESTION AUTHORITY! 97 Valk bobber, 98 Valk Rat Rod, 2K SuperValk, plus several other classic bikes
|
|
|
|
tank_post142
|
 |
« Reply #16 on: May 17, 2012, 10:30:52 PM » |
|
id say the $495 price on the oem rails is more than fair. $1200 on the bags is a bit heavy. but Momz is right, he has a stellar reputation and i've never heard of him screwing anyone, ever .
|
|
|
|
|
Logged
|
I got a rock  VRCCDS0246 
|
|
|
|
Paxton
|
 |
« Reply #17 on: May 17, 2012, 10:56:51 PM » |
|
Momz; I wish we had talked Saddlebags last month. I just purchased a set of MC Enterprises CRUISELINER bags.  I now have 3-1/2 sets.  Thank you for the offer. 
|
|
|
|
|
Logged
|
J. Paxton Gomez
1966 First year Bronco... 302 CI V8 1975 First year Chrysler Cordoba... 360 CI V8 1978 Honda 750F / Cafe Racer 2000 GL1500CY Fast-Black Standard Solo Rider
So Cal... 91205
"Four wheels move the body; two wheels move the soul."
|
|
|
Jabba
Member
    
Posts: 3563
VRCCDS0197
Greenwood Indiana
|
 |
« Reply #18 on: May 18, 2012, 03:51:36 AM » |
|
I watched them and saw they were going over $200.
I never bid.
Congrats to whoever got them... I guess.
Too much for me.
Jabba
|
|
|
|
|
Logged
|
|
|
|
|