Valkyrie Riders Cruiser Club
June 20, 2025, 04:04:59 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Send this topic Print
Author Topic: coolant leak  (Read 1559 times)
Dan Manko
Member
*****
Posts: 49


« on: June 04, 2009, 01:40:08 PM »

Can any one tell me if it's possible to have a leak at the end of the thermostatic switch connection [thermosensor]. I can see coolant leaking out the end of the connector,down the wire and into the protective sleeve that goes out to the right side. I don't see any leaks anywhere else. I pulled the front cover[timing belts] and lifted the rubber flap up, looked from there and
 from the left and righthand sides. I didn't see any other spots of coolant.

Thanks in advance.
Logged
SCain
Member
*****
Posts: 619


Rio Rancho, NM


« Reply #1 on: June 04, 2009, 02:12:08 PM »

The culprit is probably the radiator hose clamp, see if you can get a long screw driver in there and tighten it up. Take the top radiator bolt out and pull the radiator out a little.
Logged

Steve
Pages: [1]   Go Up
Send this topic Print
Jump to: