BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
 |
« on: June 20, 2016, 06:59:07 AM » |
|
Hello everyone... I know I have not been on this forum much and I have been so busy... I have been using on my Facebook page so if your interest to have me to work on your Valkyrie. Let me know and find me on my Facebook page. It's easier for me to post in Facebook with picture and map of where I am and where the route I will be going. So I don't have to deal with uploading and copy link etc over here. I will try to post here when I can. My trip will be on the way to MD/VA. We are southeast of Pittsburgh, PA. What I post when I was at home in AZ, Do you need me to work on your Valkyrie, name of town and state, your email or text message. I will contact you when I am on my way and approximately when or time. It all depend on how much work on Valkyrie and driving place to place in the route. You can tell them to find me in Facebook and any of you or I will add them in. All I need to know where you are at, I will see which is more Valkyrie to work on the route on the way to West Virginian. Also I want you to be aware that I will be driving my truck and trailer. Just to make sure there enough room for me to park by your place. I can sleep in my trailer is no problem. All I need is a restroom and shower at your place. If you got room for me is fine with me but I prefer my bed in my trailer it's comfortable... https://www.facebook.com/groups/275780059419818/ My truck and trailer that you can see how big it is...  |
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #1 on: June 20, 2016, 07:17:15 AM » |
|
What I can do is about anything only if I have tool or equipment.
I can do carb overhaul onsite, fork seals, carb sync, electric works, I do have parts with me and I do have some accessories like levers, tall risers etc...
Just ask me if I do that?
Contact me by text message or email or pm me?
|
|
|
|
|
Logged
|
|
|
|
Rams
Member
Posts: 16237
So many colors to choose from yet so few stand out
Covington, TN
|
|
« Reply #2 on: June 20, 2016, 07:30:13 AM » |
|
Bump for a great guy and a great Valkyrie technician. Who could ask for more!!!  |
|
|
|
|
Logged
|
VRCC# 29981
Learning the majority of life's lessons the hard way.
Every trip is an adventure, enjoy it while it lasts.
|
|
|
Valkorado
Member
Posts: 10494
VRCC DS 0242
Gunnison, Colorado (7,703') Here there be twisties.
|
|
« Reply #3 on: June 20, 2016, 08:02:30 AM » |
|
It's sure pretty in Gunnison, Colorado right now Bill!  |
|
|
|
« Last Edit: June 20, 2016, 08:04:41 AM by Valkorado »
|
Logged
|
Have you ever noticed when you're feeling really good, there's always a pigeon that'll come sh!t on your hood? - John Prine 97 Tourer "Silver Bullet" 01 Interstate "Ruby"  |
|
|
Oss
Member
Posts: 12606
The lower Hudson Valley
Ossining NY Chapter Rep VRCCDS0141
|
|
« Reply #4 on: June 20, 2016, 08:21:45 AM » |
|
Bill I am pleased to tell you I have not broken (much) my Valkyrie since the last time you worked on it (except for the kickstand spring, air horn and mick0peg) Folks this man is the real deal and he is a pleasure to work with and wowee does the bike run great after he has been over it Some day I would like to have you check my steering head bearings, maybe at another Inzane? Oss |
|
|
|
|
Logged
|
If you don't know where your going any road will take you there
George Harrison
When you come to the fork in the road, take it
Yogi Berra (Don't send it to me C.O.D.)
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #5 on: June 20, 2016, 08:45:25 AM » |
|
Duh me, I forgot to add quad horns too
|
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #6 on: June 20, 2016, 11:22:12 AM » |
|
Update: we will be going to Hershey PA. So my wife can enjoy there. I went there back in 1993 with my brother on motorcycles.
|
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #7 on: June 21, 2016, 05:04:50 AM » |
|
Bill I am pleased to tell you I have not broken (much) my Valkyrie since the last time you worked on it (except for the kickstand spring, air horn and mick0peg) Folks this man is the real deal and he is a pleasure to work with and wowee does the bike run great after he has been over it Some day I would like to have you check my steering head bearings, maybe at another Inzane? Oss Can check that at Inzane but not replace stem steering bearing too much time at Inzane. |
|
|
|
|
Logged
|
|
|
|
Rams
Member
Posts: 16237
So many colors to choose from yet so few stand out
Covington, TN
|
 |
« Reply #8 on: June 21, 2016, 05:22:19 AM » |
|
Bill, I don't need anything fixed or worked on (well, there is a welding project ) but, wanted to let you know that if you need a place to rest, shower, eat or just take a break from your journey. I've got plenty of room for that rig and would welcome you with open arms. My home and shop would welcome you. Have lots of cold iced tea, food, a decent bed to rest, a hot shower and can offer you some good Kentucky hospitality. Just let me know when and I'll leave the lights on. Ron aka: Rams Frankfort, KY |
|
|
|
|
Logged
|
VRCC# 29981
Learning the majority of life's lessons the hard way.
Every trip is an adventure, enjoy it while it lasts.
|
|
|
baldo
Member
Posts: 6960
Youbetcha
Cape Cod, MA
|
|
« Reply #9 on: June 21, 2016, 08:16:56 AM » |
|
Update: we will be going to Hershey PA. So my wife can enjoy there. I went there back in 1993 with my brother on motorcycles.
Bill, I want to thank you again for the great work you did to my bike at Inzane. You replaced the throttle and choke cables, carb sync, and found a bad petcock. Great job and good pricing. Side note, I made a detour on the way home and stopped in Hershey also. I bought some chocolate that I definitely don't need and shouldn't have, to share with my family. No one told me I'd get stuck in bad traffic in 100 degree heat...  ...It all made it pretty mush intact, and still tasted good. Hope to make more Inzanes and will be glad to see you there. Bob |
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #10 on: June 21, 2016, 08:40:16 AM » |
|
Bill, I don't need anything fixed or worked on (well, there is a welding project ) but, wanted to let you know that if you need a place to rest, shower, eat or just take a break from your journey. I've got plenty of room for that rig and would welcome you with open arms. My home and shop would welcome you. Have lots of cold iced tea, food, a decent bed to rest, a hot shower and can offer you some good Kentucky hospitality. Just let me know when and I'll leave the lights on. Ron aka: Rams Frankfort, KY Thanks I'll keep in mind... |
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #11 on: June 21, 2016, 08:41:37 AM » |
|
Update: we will be going to Hershey PA. So my wife can enjoy there. I went there back in 1993 with my brother on motorcycles.
Bill, I want to thank you again for the great work you did to my bike at Inzane. You replaced the throttle and choke cables, carb sync, and found a bad petcock. Great job and good pricing. Side note, I made a detour on the way home and stopped in Hershey also. I bought some chocolate that I definitely don't need and shouldn't have, to share with my family. No one told me I'd get stuck in bad traffic in 100 degree heat... ...It all made it pretty mush intact, and still tasted good. Hope to make more Inzanes and will be glad to see you there. Bob You're welcome... LoL on Hershey. We are on our way there yummy yummy yummy... |
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #12 on: June 25, 2016, 06:43:20 AM » |
|
I'm in Alexandria VA to work on two Valk. It's going to take few days to work on...
|
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #13 on: June 27, 2016, 03:56:58 AM » |
|
Anyone need me to work on Valk in NY and Mass area??? Let me know and pass to any of your friend who need Valk work done.
|
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #14 on: June 28, 2016, 02:36:19 AM » |
|
Humm interesting there's not much from here? I got Lot respond from Facebook... Oh well
|
|
|
|
|
Logged
|
|
|
|
Rams
Member
Posts: 16237
So many colors to choose from yet so few stand out
Covington, TN
|
|
« Reply #15 on: June 28, 2016, 03:06:38 AM » |
|
Just a reminder. While I don't have any work for you here, that invitation is still open should you need a place to stop and rest on the way home. The iced tea is brewing and the grill is hot. Just be sure to let me know so I can ensure I'm here. One never knows where I'll be. |
|
|
|
|
Logged
|
VRCC# 29981
Learning the majority of life's lessons the hard way.
Every trip is an adventure, enjoy it while it lasts.
|
|
|
|
CaribouHunter
|
|
« Reply #16 on: June 28, 2016, 03:58:06 AM » |
|
Bill, you've got me down, Hoover, Alabama, for two Valks, my '03 and '99. You can back down
into my driveway with your trailer. Anytime is fine. Mark
|
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #17 on: June 28, 2016, 06:49:27 AM » |
|
Bill, you've got me down, Hoover, Alabama, for two Valks, my '03 and '99. You can back down
into my driveway with your trailer. Anytime is fine. Mark
Yes Mark, I got your message on FB no problem and I know you have been asking for it since two years I think and yes I will go down to your place after the trip up north. |
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #18 on: June 28, 2016, 06:50:14 AM » |
|
Just a reminder. While I don't have any work for you here, that invitation is still open should you need a place to stop and rest on the way home. The iced tea is brewing and the grill is hot. Just be sure to let me know so I can ensure I'm here. One never knows where I'll be. Yup I got it and will see... |
|
|
|
|
Logged
|
|
|
|
|
Jess from VA
|
|
« Reply #19 on: June 28, 2016, 08:27:09 AM » |
|
Keep in mind guys that he cannot/will not come to do an oil change or carb synch. His massive King Ranch Diesel and huge trailer is expensive to run, and a pain to lug around. But if a number of you in a region can band together to have all work performed at one location, this can work out for him and for you. But you have to do the organizing.
When done going through my two interstates, there is a fellow over in MD riding over for some work, and then we will push my neighbor lady's 600VLX across the street and get it running (a nice new Navy Lt JG). Now if I can just keep my greedy County from going after me for operating a business in a zoned residential, with no business license, all will be good. I am very happy to help Bill out on this.
If anybody needs work within a fair distance from 22309, now would be the time to contact him (or me by PM or email on my profile). Bill uses FacePlant, I don't.
This has been a public service announcement.
We now return you to your regularly scheduled programming.
|
|
|
|
« Last Edit: June 28, 2016, 08:31:42 AM by Jess from VA »
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #20 on: June 28, 2016, 11:41:51 AM » |
|
Keep in mind guys that he cannot/will not come to do an oil change or carb synch. His massive King Ranch Diesel and huge trailer is expensive to run, and a pain to lug around. But if a number of you in a region can band together to have all work performed at one location, this can work out for him and for you. But you have to do the organizing.
When done going through my two interstates, there is a fellow over in MD riding over for some work, and then we will push my neighbor lady's 600VLX across the street and get it running (a nice new Navy Lt JG). Now if I can just keep my greedy County from going after me for operating a business in a zoned residential, with no business license, all will be good. I am very happy to help Bill out on this.
If anybody needs work within a fair distance from 22309, now would be the time to contact him (or me by PM or email on my profile). Bill uses FacePlant, I don't.
This has been a public service announcement.
We now return you to your regularly scheduled programming.
Thanks Jess, FacePlant? LoL....  It's FaceBook pfffttttt....  |
|
|
|
|
Logged
|
|
|
|
|
G-Man
|
|
« Reply #21 on: June 28, 2016, 01:52:09 PM » |
|
Keep in mind guys that he cannot/will not come to do an oil change or carb synch. His massive King Ranch Diesel and huge trailer is expensive to run, and a pain to lug around. But if a number of you in a region can band together to have all work performed at one location, this can work out for him and for you. But you have to do the organizing.
When done going through my two interstates, there is a fellow over in MD riding over for some work, and then we will push my neighbor lady's 600VLX across the street and get it running (a nice new Navy Lt JG). Now if I can just keep my greedy County from going after me for operating a business in a zoned residential, with no business license, all will be good. I am very happy to help Bill out on this.
If anybody needs work within a fair distance from 22309, now would be the time to contact him (or me by PM or email on my profile). Bill uses FacePlant, I don't.
This has been a public service announcement.
We now return you to your regularly scheduled programming.
Thanks Jess, FacePlant? LoL.... It's FaceBook pfffttttt.... I need electrical work in NY. Hey Oss, Darryl, Deb, Stuart, New York, New Jersey, Connecticut riders, Anybody need anything that Bill can help us out with? I can host. |
|
|
|
|
Logged
|
|
|
|
Oss
Member
Posts: 12606
The lower Hudson Valley
Ossining NY Chapter Rep VRCCDS0141
|
|
« Reply #22 on: June 28, 2016, 04:42:52 PM » |
|
My driveway is 2 car deep and 3 wide so between street in front of house and driveway I would be able to accomodate you ( and wife and dog) and your rig, dont care for neighbor on one side anyway lol Dinner will be on us also.
Do you rebuild alternator in spare time? Maybe change timing belt? Maybe check that steering head? Put Austone on my spare wheel? G-man lives on small culdesac no room by him, he would have to get bike to my house for you to work it. My zip code 10510 right off 9A off chappaqua rd. traffic lite. If crossing TZ bridge get off Saw Mill exit (on right after about 1 mile) STAY and bear right to exit rt 119, then left a few blocks to 9A north
You have my cell Bill so if interest in the area just text or PM or post and happy to have you over
Oss
|
|
|
|
|
Logged
|
If you don't know where your going any road will take you there
George Harrison
When you come to the fork in the road, take it
Yogi Berra (Don't send it to me C.O.D.)
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #23 on: June 28, 2016, 06:06:33 PM » |
|
Keep in mind guys that he cannot/will not come to do an oil change or carb synch. His massive King Ranch Diesel and huge trailer is expensive to run, and a pain to lug around. But if a number of you in a region can band together to have all work performed at one location, this can work out for him and for you. But you have to do the organizing.
When done going through my two interstates, there is a fellow over in MD riding over for some work, and then we will push my neighbor lady's 600VLX across the street and get it running (a nice new Navy Lt JG). Now if I can just keep my greedy County from going after me for operating a business in a zoned residential, with no business license, all will be good. I am very happy to help Bill out on this.
If anybody needs work within a fair distance from 22309, now would be the time to contact him (or me by PM or email on my profile). Bill uses FacePlant, I don't.
This has been a public service announcement.
We now return you to your regularly scheduled programming.
Thanks Jess, FacePlant? LoL.... It's FaceBook pfffttttt.... I need electrical work in NY. Hey Oss, Darryl, Deb, Stuart, New York, New Jersey, Connecticut riders, Anybody need anything that Bill can help us out with? I can host. Yes I can do electric work but what is it? Thanks BigBF |
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #24 on: June 28, 2016, 06:11:01 PM » |
|
My driveway is 2 car deep and 3 wide so between street in front of house and driveway I would be able to accomodate you ( and wife and dog) and your rig, dont care for neighbor on one side anyway lol Dinner will be on us also.
Do you rebuild alternator in spare time? Maybe change timing belt? Maybe check that steering head? Put Austone on my spare wheel? G-man lives on small culdesac no room by him, he would have to get bike to my house for you to work it. My zip code 10510 right off 9A off chappaqua rd. traffic lite. If crossing TZ bridge get off Saw Mill exit (on right after about 1 mile) STAY and bear right to exit rt 119, then left a few blocks to 9A north
You have my cell Bill so if interest in the area just text or PM or post and happy to have you over
Oss
Sure Oss I have the bearings for stem steering no problem.... Also any of you wonder what kind of my dog she's Aussie. She like to bark at someone to get my attention and she's service dog too also if you or anyone run she will chase you because she's herd dog and she think you like cow or goat that's why... She will love u if you give her your foods ha ha ha.... She like to stay inside with A/C. Yup she's spoiled rotten dog lol... |
|
|
|
|
Logged
|
|
|
|
|
The emperor has no clothes
|
|
« Reply #25 on: June 28, 2016, 06:47:45 PM » |
|
My driveway is 2 car deep and 3 wide so between street in front of house and driveway I would be able to accomodate you ( and wife and dog) and your rig, dont care for neighbor on one side anyway lol Dinner will be on us also.
Do you rebuild alternator in spare time? Maybe change timing belt? Maybe check that steering head? Put Austone on my spare wheel? G-man lives on small culdesac no room by him, he would have to get bike to my house for you to work it. My zip code 10510 right off 9A off chappaqua rd. traffic lite. If crossing TZ bridge get off Saw Mill exit (on right after about 1 mile) STAY and bear right to exit rt 119, then left a few blocks to 9A north
You have my cell Bill so if interest in the area just text or PM or post and happy to have you over
Oss
Sure Oss I have the bearings for stem steering no problem.... Also any of you wonder what kind of my dog she's Aussie. She like to bark at someone to get my attention and she's service dog too also if you or anyone run she will chase you because she's herd dog and she think you like cow or goat that's why... She will love u if you give her your foods ha ha ha.... She like to stay inside with A/C. Yup she's spoiled rotten dog lol... She's a nice dog indeed. It was cool seeing you guys with her at the hot tub in Spearfish. |
|
|
|
|
Logged
|
|
|
|
Rams
Member
Posts: 16237
So many colors to choose from yet so few stand out
Covington, TN
|
|
« Reply #26 on: June 28, 2016, 06:49:34 PM » |
|
she think you like cow or goat
Hmm, I did hear a secretary candidate refer to some old goat once................... Nah, couldn't have been Oss. |
|
|
|
« Last Edit: June 28, 2016, 06:53:43 PM by Rams »
|
Logged
|
VRCC# 29981
Learning the majority of life's lessons the hard way.
Every trip is an adventure, enjoy it while it lasts.
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #27 on: June 29, 2016, 12:31:58 AM » |
|
I want to make it clear and I was tired last night after working on Valk. I don't mean this message is for Oss since he already met my dog.... I mean for anyone who concern about my dog if we stop at anyone's place to work on Valk.
|
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #28 on: June 29, 2016, 12:34:09 AM » |
|
My driveway is 2 car deep and 3 wide so between street in front of house and driveway I would be able to accomodate you ( and wife and dog) and your rig, dont care for neighbor on one side anyway lol Dinner will be on us also.
Do you rebuild alternator in spare time? Maybe change timing belt? Maybe check that steering head? Put Austone on my spare wheel? G-man lives on small culdesac no room by him, he would have to get bike to my house for you to work it. My zip code 10510 right off 9A off chappaqua rd. traffic lite. If crossing TZ bridge get off Saw Mill exit (on right after about 1 mile) STAY and bear right to exit rt 119, then left a few blocks to 9A north
You have my cell Bill so if interest in the area just text or PM or post and happy to have you over
Oss
Sure Oss I have the bearings for stem steering no problem.... Also any of you wonder what kind of my dog she's Aussie. She like to bark at someone to get my attention and she's service dog too also if you or anyone run she will chase you because she's herd dog and she think you like cow or goat that's why... She will love u if you give her your foods ha ha ha.... She like to stay inside with A/C. Yup she's spoiled rotten dog lol... She's a nice dog indeed. It was cool seeing you guys with her at the hot tub in Spearfish. Oh that was you? LoL. It's hard to remember everyone and I have met way too many people at Inzane.. I guess This is why I like Facebook and be able to know picture of everyone face. |
|
|
|
« Last Edit: June 29, 2016, 12:36:10 AM by BigBF »
|
Logged
|
|
|
|
|
G-Man
|
|
« Reply #29 on: June 29, 2016, 06:45:32 AM » |
|
Keep in mind guys that he cannot/will not come to do an oil change or carb synch. His massive King Ranch Diesel and huge trailer is expensive to run, and a pain to lug around. But if a number of you in a region can band together to have all work performed at one location, this can work out for him and for you. But you have to do the organizing.
When done going through my two interstates, there is a fellow over in MD riding over for some work, and then we will push my neighbor lady's 600VLX across the street and get it running (a nice new Navy Lt JG). Now if I can just keep my greedy County from going after me for operating a business in a zoned residential, with no business license, all will be good. I am very happy to help Bill out on this.
If anybody needs work within a fair distance from 22309, now would be the time to contact him (or me by PM or email on my profile). Bill uses FacePlant, I don't.
This has been a public service announcement.
We now return you to your regularly scheduled programming.
Thanks Jess, FacePlant? LoL.... It's FaceBook pfffttttt.... I need electrical work in NY. Hey Oss, Darryl, Deb, Stuart, New York, New Jersey, Connecticut riders, Anybody need anything that Bill can help us out with? I can host. Yes I can do electric work but what is it? Thanks BigBF I blew 3 headlights (low beam) in a very short amount of time and my turn signals don't work properly. I added LED turn signal bulbs and they were blinking fast when turned on, but the still worked properly. I then added a trailer and spliced in under the right side cover. This slowed down the blinking (more load added). Then I "unspliced" the trailer harness and that's when my problems started. I changed back to regular bulbs, but they still don't work right. I have Progressive springs for the front end sitting on a shelf that want to be installed. Also, my Valkyrie is 13 years old with 45,000 miles. It's never been ridden by anyone else with Valkyrie knowledge and has NEVER been serviced except for oil changes and brake pads. Lots of rings, seals, etc. could probably use changing. Thanks! |
|
|
|
|
Logged
|
|
|
|
|
The emperor has no clothes
|
|
« Reply #30 on: June 29, 2016, 06:49:05 AM » |
|
My driveway is 2 car deep and 3 wide so between street in front of house and driveway I would be able to accomodate you ( and wife and dog) and your rig, dont care for neighbor on one side anyway lol Dinner will be on us also.
Do you rebuild alternator in spare time? Maybe change timing belt? Maybe check that steering head? Put Austone on my spare wheel? G-man lives on small culdesac no room by him, he would have to get bike to my house for you to work it. My zip code 10510 right off 9A off chappaqua rd. traffic lite. If crossing TZ bridge get off Saw Mill exit (on right after about 1 mile) STAY and bear right to exit rt 119, then left a few blocks to 9A north
You have my cell Bill so if interest in the area just text or PM or post and happy to have you over
Oss
Sure Oss I have the bearings for stem steering no problem.... Also any of you wonder what kind of my dog she's Aussie. She like to bark at someone to get my attention and she's service dog too also if you or anyone run she will chase you because she's herd dog and she think you like cow or goat that's why... She will love u if you give her your foods ha ha ha.... She like to stay inside with A/C. Yup she's spoiled rotten dog lol... She's a nice dog indeed. It was cool seeing you guys with her at the hot tub in Spearfish. Oh that was you? LoL. It's hard to remember everyone and I have met way too many people at Inzane.. I guess This is why I like Facebook and be able to know picture of everyone face.  I'm that old, fat, bald guy that made the hot tub over flow when I got in.  |
|
|
|
|
Logged
|
|
|
|
|
CajunRider
|
|
« Reply #31 on: June 29, 2016, 05:34:47 PM » |
|
This is a cool idea... I like it! You do anything on other bike types? I need new fork seals on a Triumph Thunderbird Sport. |
|
|
|
|
Logged
|
Sent from my Apple IIe
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #32 on: June 30, 2016, 04:29:19 AM » |
|
My driveway is 2 car deep and 3 wide so between street in front of house and driveway I would be able to accomodate you ( and wife and dog) and your rig, dont care for neighbor on one side anyway lol Dinner will be on us also.
Do you rebuild alternator in spare time? Maybe change timing belt? Maybe check that steering head? Put Austone on my spare wheel? G-man lives on small culdesac no room by him, he would have to get bike to my house for you to work it. My zip code 10510 right off 9A off chappaqua rd. traffic lite. If crossing TZ bridge get off Saw Mill exit (on right after about 1 mile) STAY and bear right to exit rt 119, then left a few blocks to 9A north
You have my cell Bill so if interest in the area just text or PM or post and happy to have you over
Oss
Sure Oss I have the bearings for stem steering no problem.... Also any of you wonder what kind of my dog she's Aussie. She like to bark at someone to get my attention and she's service dog too also if you or anyone run she will chase you because she's herd dog and she think you like cow or goat that's why... She will love u if you give her your foods ha ha ha.... She like to stay inside with A/C. Yup she's spoiled rotten dog lol... She's a nice dog indeed. It was cool seeing you guys with her at the hot tub in Spearfish. Oh that was you? LoL. It's hard to remember everyone and I have met way too many people at Inzane.. I guess This is why I like Facebook and be able to know picture of everyone face. I'm that old, fat, bald guy that made the hot tub over flow when I got in. LoL |
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #33 on: June 30, 2016, 04:41:15 AM » |
|
Keep in mind guys that he cannot/will not come to do an oil change or carb synch. His massive King Ranch Diesel and huge trailer is expensive to run, and a pain to lug around. But if a number of you in a region can band together to have all work performed at one location, this can work out for him and for you. But you have to do the organizing.
When done going through my two interstates, there is a fellow over in MD riding over for some work, and then we will push my neighbor lady's 600VLX across the street and get it running (a nice new Navy Lt JG). Now if I can just keep my greedy County from going after me for operating a business in a zoned residential, with no business license, all will be good. I am very happy to help Bill out on this.
If anybody needs work within a fair distance from 22309, now would be the time to contact him (or me by PM or email on my profile). Bill uses FacePlant, I don't.
This has been a public service announcement.
We now return you to your regularly scheduled programming.
Thanks Jess, FacePlant? LoL.... It's FaceBook pfffttttt.... I need electrical work in NY. Hey Oss, Darryl, Deb, Stuart, New York, New Jersey, Connecticut riders, Anybody need anything that Bill can help us out with? I can host. Yes I can do electric work but what is it? Thanks BigBF I blew 3 headlights (low beam) in a very short amount of time and my turn signals don't work properly. I added LED turn signal bulbs and they were blinking fast when turned on, but the still worked properly. I then added a trailer and spliced in under the right side cover. This slowed down the blinking (more load added). Then I "unspliced" the trailer harness and that's when my problems started. I changed back to regular bulbs, but they still don't work right. I have Progressive springs for the front end sitting on a shelf that want to be installed. Also, my Valkyrie is 13 years old with 45,000 miles. It's never been ridden by anyone else with Valkyrie knowledge and has NEVER been serviced except for oil changes and brake pads. Lots of rings, seals, etc. could probably use changing. Thanks! Yes I can fix that problem with LED lights. Headlight three time? Did u touch on glass? Progressive fork spring no problem... Yep time for your Valk to fix up and do carb sync too |
|
|
|
|
Logged
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #34 on: June 30, 2016, 04:46:39 AM » |
|
This is a cool idea... I like it! You do anything on other bike types? I need new fork seals on a Triumph Thunderbird Sport. Yep, but do I have right size fork seal driver? I only bring one for Valk and its 45MM If you got book, parts, maybe floor shop press? |
|
|
|
|
Logged
|
|
|
|
|
|
|
mmvalk
|
|
« Reply #36 on: July 01, 2016, 03:34:47 AM » |
|
Oss / G-Man, I live in the south shore of LI area (zip 11691) and like you G-Man, no one but me has ridden my 1999 standard with about 39k miles and it would be great to take advantage of BF's presence in our locale for him to perform a health-check on my bike (valve check, carb sync, change old tubing, remove the smog stuff...)
Please let me know when and where (Oss, meet up at your place?)
Marty
|
|
|
|
|
Logged
|
|
|
|
Oss
Member
Posts: 12606
The lower Hudson Valley
Ossining NY Chapter Rep VRCCDS0141
|
|
« Reply #37 on: July 01, 2016, 05:01:02 AM » |
|
Bill just tell me when you are coming
PM or post or text 914 522 zero o83
If you dont have them with you what are part # for timing belts and steering head and I will try to order today from who you say is best
|
|
|
|
« Last Edit: July 01, 2016, 05:04:53 AM by Oss »
|
Logged
|
If you don't know where your going any road will take you there
George Harrison
When you come to the fork in the road, take it
Yogi Berra (Don't send it to me C.O.D.)
|
|
|
|
|
BigBF
Member
Posts: 814
Text message at 602-332-4872
Phx AZ
|
|
« Reply #39 on: July 01, 2016, 05:10:21 AM » |
|
Bill just tell me when you are coming
PM or post or text 914 522 zero o83
If you dont have them with you what are part # for timing belts and steering head and I will try to order today from who you say is best
Oss I will for sure after holiday I'm not going to get stuck in traffic. I have timing belts and tension pulley. I have 4 set. |
|
|
|
|
Logged
|
|
|
|
|
