|
Title: After desmog, no spark to cylinders 1& 2... UPDATE/Resolved Post by: PSUbag on March 08, 2020, 12:21:06 PM Did I possibly knock a wire connection loose or something when installing the airbox? Anyone know where to start looking? Bike was running great before the desmog. :-\
Title: Re: After desmog, no spark to cylinders 1& 2... Post by: wirral_biker on March 08, 2020, 01:21:30 PM Tank off and back track to the coil....probably be a low tension wire connection/break.
Title: Re: After desmog, no spark to cylinders 1& 2... Post by: John Schmidt on March 08, 2020, 01:44:47 PM #1 & 2 are the two front cylinders(right/left sides respectively) and as I recall are fed/fired by the front coil mounted on the left frame member under the tank. Loosen the tank and lift just enough to see if you knocked a wire off that coil.
Title: Re: After desmog, no spark to cylinders 1& 2... UPDATE/Resolved Post by: PSUbag on March 08, 2020, 04:02:06 PM Sure enough, I must of bumped the rear wire off of the coil. This website is the best. She is running like new again! ;D
|