Valkyrie Riders Cruiser Club

I need the part # or where to find it...
It's the little brass bushings that go in the fairing on an I/S that the screws that hold the speaker panel on goes into... There are 4 on each side....

You can find Part numbers here:

http://www.hondadirectline.com/OEMpartfinder.htm (http://www.hondadirectline.com/OEMpartfinder.htm)

I don't see the inserts you are looking for listed in either the fairing or Meter panel schematic.  You might try your dealer, or a FASTENAL store.

http://www.hondadirectline.com/OEMpartfinder.htm#/Honda/GL1500CF_AC_(99)_MOTORCYCLE%2c_USA%2c_VIN%23_1HFSC411-XA000001/METER_PANEL/GL1500CF-99-AC/2Y14MBYXMBY4F0200AA (http://www.hondadirectline.com/OEMpartfinder.htm#/Honda/GL1500CF_AC_(99)_MOTORCYCLE%2c_USA%2c_VIN%23_1HFSC411-XA000001/METER_PANEL/GL1500CF-99-AC/2Y14MBYXMBY4F0200AA)

This one, works,,,, for me.      :cooldude:

http://www.partzilla.com/parts/search/Honda/Motorcycle/2001/GL1500CF+AC/parts.html (http://www.partzilla.com/parts/search/Honda/Motorcycle/2001/GL1500CF+AC/parts.html)

I was thinkin in ''meter panel'' as well...    :coolsmiley:

It is not on those part fish pages... Have ordered what was thought to be the part but it came in with right part # but was just a nut with a flange on it...  I've been on the phone with HDL in
both Fl. and Ohio and we can't find it... Still looking for part # or place that has it or where to look
under....

If you find it please post it. Many more of us could use some of them.

How many do you need, I have some spares, and no longer an Interstate.

and the part number is      013    NUT, FLANGE (5MM) 91616-SM3-000  Look under meter
panel.

Where did you get them Bill?  Do you have a link for future reference?

I could use 2 please.... How much???  T.I.A.

Service honda has them.   http://www.servicehondapsn.com/fiche_section_detail.asp (http://www.servicehondapsn.com/fiche_section_detail.asp)

Item # 13

PM me your address and I will drop them in the mail tomorrow.

JeffK's Generic Parts Page shows this.

Inserts for fairing, Honda part #

90316-MJ1-000

But the one Grumpy posted probably is a newer updated part #

Ok guys,
I have in my hand 10 of the # 13 ( 91616-sm3-000 ) and they are not the ones... These are nuts with flanges on them...
Grump is going to send me two but I would like to find the # so I could have some spares...

See the post above your last it has the part number.  If you do a reverse part number lookup on any of the online parts sites it shows up as
90316-MJ1-000         NUT, INSERT (5X0.8)    $2.89

I knew I had seen it somewhere, just forgot it was on Jeff's generic parts page.  Thanks Thunderbolt.

Thanks Terry....
and everyone else ....

Just to make sure, I believe I have these have the old part number. They hold in the speaker panels etc on the Interstate.

(http://pic100.picturetrail.com/VOL1063/4037445/24513015/408936793.jpg)

Just pluged dat part number in, n' the list of bikes that use it, DO NOT,,,, include a valk...    :coolsmiley:

http://www.partzilla.com/parts/detail/honda/HP-90316-MJ1-000.html (http://www.partzilla.com/parts/detail/honda/HP-90316-MJ1-000.html)


 ???

Me thinks partszilla is screwed up, I know these fit the inner panels on a Valkyrie Interstate, I replaced 4 of mine with these, the ones I have left were ones I did not use. Mine are the old number, new number is 1616-SM3-000 Here are the results.

http://www.partzilla.com/parts/detail/honda/HP-91616-SM3-000.html (http://www.partzilla.com/parts/detail/honda/HP-91616-SM3-000.html)

That's the # I have and their NOT the right ones....  Going to call tomorrow and see if they can
get the right ones....  I hope 1 of the 5 places I called can do something....

Where do they go ?, the ones I have go in the inner panel's of the front fairing ( speaker etc) the speedometer, and the lower air dams use a different number. Location would really help.

Reading the original post, TJ these are the correct ones for the speaker panels, I will mail them in the morning.

Those are the ones I need ... ( for speaker panel )

in the mail grandpa

Thank You Bill and Sweetpea.....