Valkyrie Riders Cruiser Club
June 27, 2025, 04:06:52 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Handlebar Clamps-Source?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Handlebar Clamps-Source?  (Read 867 times)
Fazer
Member
*****
Posts: 947


West Chester (Cincinnati), Ohio
« on: July 16, 2018, 05:15:14 AM »
I want to replace the aluminum cover that goes over the handlebars between the clamps and clamps the bar to the riser.  Number 4 in the diagram.  I want access to the bar itself to mount my GPS.  I don't want to use new risers.  Anyone have a source for a good clamp?  I only plan to use the top half.  Make sense?
Logged
Nothing in moderation...
Fazer
Member
*****
Posts: 947


West Chester (Cincinnati), Ohio
« Reply #1 on: July 16, 2018, 05:16:14 AM »
Dont know why the diagram is not displayed--tying again.
Logged
Nothing in moderation...
hubcapsc
Member
*****
Posts: 16779


upstate

South Carolina
« Reply #2 on: July 16, 2018, 05:20:30 AM »

When you're at the partzilla site, right click on the picture and hit "show image" or
some such to see image. Then use that URL to post the picture.



-Mike
Logged
https://sites.google.com/a/g.clemson.edu/confederate-memorial-day-at-clemson/
Fazer
Member
*****
Posts: 947


West Chester (Cincinnati), Ohio
« Reply #3 on: July 16, 2018, 05:27:18 AM »
Thank Mike.  I just ordered a set for a Harley soft tale off Fleabay that look like they will work. 
Logged
Nothing in moderation...
Chrisj CMA
Member
*****
Posts: 14769


Crestview (Panhandle) Florida
« Reply #4 on: July 16, 2018, 05:37:49 AM »
If the fleabay one doesn't work I have the set up you need. I took the GPS mount off from between the risers so I could easily go back to the oem clamp if you want to trade
Logged
Roidfingers
Member
*****
Posts: 729


Tuscaloosa, Alabama
« Reply #5 on: July 16, 2018, 05:57:21 AM »
Quote from: Chrisj CMA on July 16, 2018, 05:37:49 AM
If the fleabay one doesn't work I have the set up you need. I took the GPS mount off from between the risers so I could easily go back to the oem clamp if you want to trade


Got a link to the source? I might consider it.
Logged
Bagger John - #3785
Member
*****
Posts: 1952
« Reply #6 on: July 16, 2018, 06:17:48 AM »
Use the Hondaline chrome riser caps from an 1100 Shadow.

Did this with several of mine.

Alternatively, I have an aftermarket set of Magna two-piece riser clamps (square profile) which may work for your application. They're not chromed like the Hondaline accessory, though - polished raw aluminum finish.
Logged
sandy
Member
*****
Posts: 5383


Mesa, AZ.
« Reply #7 on: July 16, 2018, 07:33:29 AM »
In addition to the shadow, top clamps from a VTX1300 work as well. You only need the top part. They work with the Valk lower risers.


Quote from: Bagger John - #3785 on July 16, 2018, 06:17:48 AM
Use the Hondaline chrome riser caps from an 1100 Shadow.

Did this with several of mine.

Alternatively, I have an aftermarket set of Magna two-piece riser clamps (square profile) which may work for your application. They're not chromed like the Hondaline accessory, though - polished raw aluminum finish.
Logged
http://i982.photobucket.com/albums/ae310/sandyal55/ManCave.jpg
Fazer
Member
*****
Posts: 947


West Chester (Cincinnati), Ohio
« Reply #8 on: July 16, 2018, 08:15:08 AM »
Here's what I bought.

https://www.ebay.com/itm/Chrome-Aluminum-1-Handlebar-Bar-Risers-Clamps-Mounts-for-Harley-Custom-Yamaha/232132814387?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Logged
Nothing in moderation...
Chrisj CMA
Member
*****
Posts: 14769


Crestview (Panhandle) Florida
« Reply #9 on: July 16, 2018, 09:07:28 AM »
Quote from: Roidfingers on July 16, 2018, 05:57:21 AM
Quote from: Chrisj CMA on July 16, 2018, 05:37:49 AM
If the fleabay one doesn't work I have the set up you need. I took the GPS mount off from between the risers so I could easily go back to the oem clamp if you want to trade


Got a link to the source? I might consider it.


??  these are on the Bruce bike and I was offering to trade them for the dog bone clamp if he wanted them...
Logged
Fazer
Member
*****
Posts: 947


West Chester (Cincinnati), Ohio
« Reply #10 on: July 16, 2018, 09:52:15 AM »
Chris--I saw your offer.  Thanks, but I want to keep the original.  I have the original windshield and headlamp reflector as well in case I ever want to go back to "stock," or the person to whom I sell does.

Greg
Logged
Nothing in moderation...
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS