Valkyrie Riders Cruiser Club
July 11, 2025, 03:54:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Print
Author Topic: New Idear ? Storage !  (Read 1388 times)
Spirited-6
Member
*****
Posts: 2214


Nicholasville, Ky.


« on: November 25, 2009, 10:07:12 AM »

Wax all painted and chromed surfaces.  Consider leaving the wax on as an added layer of protection.  If you find it difficult to remove in the spring, usually waxing over it with fresh wax will cut right through the old hardened wax.

I have not heard of this but might work. from; Shadow Forum.  I would think that it would leave a surface that would collect things.  Undecided I like a "slick" surface myself.  Wink
Logged

Spirited-6
Steve K (IA)
Member
*****
Posts: 1662

Cedar Rapids, Iowa


« Reply #1 on: November 25, 2009, 10:59:15 AM »

I don't know if I would want to leave the wax on and not buff it until spring.  I have a brother-in-law who did that to an old Ford Torino....ruined it.  He was never able to get it off. ???  Ended up just driving around with it that way. uglystupid2  Looked pretty goofy because the car was a dark green and he used Turtle Wax. Cheesy  Heck, that stuff is hard to remove as soon as it dries.  No wonder it wouldn't come off several months later.
Got both of our Valks washed, waxed, Sea Foam in and tanks topped off and under covers. cooldude  Winter is just around the corner here. Cry
« Last Edit: November 25, 2009, 11:01:55 AM by Steve K (IA) » Logged


States I Have Ridden In
Black Pearl's Captain
Member
*****
Posts: 2072


Emerald Coast


« Reply #2 on: November 25, 2009, 11:58:01 AM »

Old wax is very hard to remove once it is dried into cement. Wax on wax off.

Raymond
Logged

gregc
Member
*****
Posts: 437


Media Pa.


« Reply #3 on: November 25, 2009, 01:30:24 PM »

  Leaving old wax on a painted surface, thru winter storage isn't a good idea.  It will trap all the dust and dirt, the when you have to remove it with new wax, you are going to put all kinds of micro scratches in the paint.  It would be better to wax and remove it, store for winter, then wash and wax it again.
Logged
fudgie
Member
*****
Posts: 10613


Better to be judged by 12, then carried by 6.

Huntington Indiana


WWW
« Reply #4 on: November 25, 2009, 05:56:17 PM »

Heck I find wax from last season that I forgot to remove. Same with chrome polish!  crazy2 Mine always wiped right off tho.
Logged



Now you're in the world of the wolves...
And we welcome all you sheep...

VRCC-#7196
VRCCDS-#0175
DTR
PGR
Dogg
Member
*****
Posts: 1216


Berlin Md


« Reply #5 on: November 25, 2009, 07:28:00 PM »

spray wd40 on everything. washes right off next spring. works like a charm:D
Logged

Robert
Member
*****
Posts: 17012


S Florida


« Reply #6 on: November 26, 2009, 05:55:21 AM »

I wouldn't leave the wax on either I think I can remember having the same problem with taking it off and really it doesn't provide any better protection in fact it will attract dirt and stick to the surface and when you take it off will scratch. Why not get one of those dust covers and put that over the bike.
Logged

“Some people see things that are and ask, Why? Some people dream of things that never were and ask, Why not? Some people have to go to work and don’t have time for all that.”
fudgie
Member
*****
Posts: 10613


Better to be judged by 12, then carried by 6.

Huntington Indiana


WWW
« Reply #7 on: November 26, 2009, 05:57:00 AM »

spray wd40 on everything. washes right off next spring. works like a charm:D

Will that help with the moisture? Mine like to sweat esp in feb-april.
Logged



Now you're in the world of the wolves...
And we welcome all you sheep...

VRCC-#7196
VRCCDS-#0175
DTR
PGR
Dogg
Member
*****
Posts: 1216


Berlin Md


« Reply #8 on: November 26, 2009, 08:40:20 AM »

wd40 is water repelent...
Logged

Pages: [1]   Go Up
Print
Jump to: