Valkyrie Riders Cruiser Club
June 25, 2025, 11:06:35 AM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Homepage
:
Photostash
:
JustPics
:
Shoptalk
:
Old Tech Archive
:
Classifieds
:
Contact Staff
News
: If you're new to this message board,
read THIS!
Home
Help
Search
Login
Register
Valkyrie Riders Cruiser Club
>
General
>
1500 Tech Board
>
Saved my second Valkyrie
Pages: [
1
]
Go Down
« previous
next »
Author
Topic: Saved my second Valkyrie (Read 1147 times)
Chrisj CMA
Member
Posts: 14766
Crestview (Panhandle) Florida
Saved my second Valkyrie
«
on:
June 23, 2019, 05:43:13 PM »
So. A couple years ago a friend of mine told me he tried to start his Valkyrie and he heard the dreaded clunk. Since I warn all Valkyrie owners about possible hydrolock and the classic signs, he called me right away. Long story short I told him to order a Pingel because his petcock was obviously leaking in all settings and after cracking open the carburetor that let fuel into the cylinder it was obvious and quite exciting actually to visually see that the float and needle valve were not operational so he ordered a needle valve and float. Put it all back together and the hydrolock was solved and no damage to the engine.
So last week another friend with a different Valkyrie had let his set too long. He had a hydrolock and fuel leak from one carburetor. It was so bad fuel was just pouring out of the exhaust while trying to start the engine. No way was it starting. So once again the first thing he did was to call me lol Jeff will know what to do. So the carbs come out and we crack that carb. The float was so stuck I thought it was going to break before it busted loose. And once again just like on the previous bike. The petcock was leaking fuel in all settings once I disconnected the fuel line. So there was another visual of the two faults causing the hydrolock.
The second guy is selling his bike so he ordered a new OEM petcock so he could retain the fuel selector switch. He also ordered a new float and needle just to be safe. With the new parts installed and the carbs cleaned by the dealer ($600) we put it all back together and no more hydrolock and no engine damage
This stuff is serious. Listen closely each and every time you start your bike. Anything fishy STOP. It’s usually subsequent tries that cause engine damage.
«
Last Edit: June 23, 2019, 05:54:43 PM by Chrisj CMA
»
Logged
Bighead
Member
Posts: 8654
Madison Alabama
Re: Saved my second Valkyrie
«
Reply #1 on:
June 23, 2019, 05:59:18 PM »
I always just bump the starter before going all in.
Logged
1997 Bumble Bee
1999 Interstate (sold)
2016 Wing
RonW
Member
Posts: 1867
Newport Beach
Re: Saved my second Valkyrie
«
Reply #2 on:
June 23, 2019, 09:42:34 PM »
copy dat.
Logged
2000 Valkyrie Tourer
Bagger John - #3785
Member
Posts: 1952
Re: Saved my second Valkyrie
«
Reply #3 on:
June 24, 2019, 09:00:02 AM »
When I store my Valks for any length of time (say, winter layup) I drain the carbs via their drain screws and leave them open. The tanks are filled completely and Marine Sta-Bil is added.
Never had a petcock leakage problem - 5 Valks over 19 years of ownership - until last year. The second I/S I've owned lost about 2 gallons of gas over an 8-month layup. I rebuilt that petcock and ran the bike until fall, at which time I laid it up for the winter.
Found about 1 gallon missing this spring. Note that my other Valks have never lost any fuel during storage, so it appears the stock petcock's main valve is faulty.
Off it comes soon, and on goes a manual petcock w/ Dan-Marc shutoff. Even then, the drains will be left open for long-term storage.
Logged
Avanti
Member
Posts: 1403
Stoughton, Wisconsin
Re: Saved my second Valkyrie
«
Reply #4 on:
June 24, 2019, 12:00:11 PM »
In each case is the stuck float on the same side?
Logged
Chrisj CMA
Member
Posts: 14766
Crestview (Panhandle) Florida
Re: Saved my second Valkyrie
«
Reply #5 on:
June 24, 2019, 12:13:20 PM »
Quote from: Avanti on June 24, 2019, 12:00:11 PM
In each case is the stuck float on the same side?
One was a stuck float and one was a float not working properly. No they were not on the same side
Logged
Pages: [
1
]
Go Up
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Chapter Boards
-----------------------------
=> Texas Chapter
=> Kansas Chapter
=> Iowa Chapter
=> Florida Chapter
=> SoCal Chapter
=> Northwest Valkyrie Riders
=> British Columbia
=> New England Chapter
=> Arizona Chapter
=> South Dakota Chapter
-----------------------------
General
-----------------------------
=> General Board
=> InZane XXV
=> 1500 Tech Board
=> 1800 Tech Board
=> VRCC Members Memorial Board
=> InZanes past
=> old classifieds