Valkyrie Riders Cruiser Club
June 23, 2025, 12:19:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Send this topic Print
Author Topic: IS sound system questions  (Read 951 times)
txtriathlete
Member
*****
Posts: 59


« on: June 01, 2020, 11:57:02 AM »

Front speakers quit playing, not sure why. Nothing new going on. Swapped out speakers a while back for polks, they had been working fine. Connections are tight, fader should allow speakers to play but no sound.

Thoughts?
Logged
Ramie
Member
*****
Posts: 1318


2001 I/S St. Michael MN


« Reply #1 on: June 01, 2020, 09:50:24 PM »

Check if you've got things switched to headset.
Logged

“I am not a courageous person by nature. I have simply discovered that, at certain key moments in this life, you must find courage in yourself, in order to move forward and live. It is like a muscle and it must be exercised, first a little, and then more and more.  A deep breath and a leap.”
txtriathlete
Member
*****
Posts: 59


« Reply #2 on: June 02, 2020, 06:37:26 AM »

No not set to headset, it’s playing through the rear just fine. It won’t “fade” to the front. Both front speakers are plugged in tight.  I had the fairing off a while back, I’m wondering if I missed a connector somewhere. The two bullet connectors for each speaker are connected but maybe there is another plug in there I missed?
Logged
gordonv
Member
*****
Posts: 5760


VRCC # 31419

Richmond BC


« Reply #3 on: June 04, 2020, 10:36:09 AM »

I always go to the fiche, look it over. The radio is simple. The speakers, those bullets, then the wire to a connector into the main, then the main to the radio.

I would unplug the radio. Plug back in.

Look over your setting. I believe I already sent you the owner manual radio settings? If you have to, take the inner fairing out, unplug the speaker, and plug it into the pod wire. Just to confirm that the speaker is work. It must be, since it's affecting both of them.
Logged

1999 Black with custom paint IS

Pages: [1]   Go Up
Send this topic Print
Jump to: