Valkyrie Riders Cruiser Club
July 05, 2025, 11:15:19 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Pages: [1]   Go Down
Print
Author Topic: Garland for Lamp Post  (Read 985 times)
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« on: November 13, 2020, 05:00:08 PM »

We have three bronze lamp posts (with lamps) along our drive way.  They are powered by an underground 120vac that runs to each lamp along the driveway.  The lamp posts are mounted/instlalled in a concrete pad.  (the total distance is about 120 feet maybe less (about 30 to 40 feet between lamps)

My wife has requested that we consider wrapping the posts in a lighted (lite???) garland. 

I am looking for suggestions about how I might accomplish this.  Powering them from 120VAC is not viable since the power is supplied to each post underground through the bottom of the concrete pad.

What would be ok, would be a a battery powered garland that I could run off a timer or a remote controlled switch.  A dawn to dusk kind of thing would be ok, but I'd rather be able to turn them on and off remotely. 

Logged

Moonshot_1
Member
*****
Posts: 5111


Me and my Valk at Freedom Rock


« Reply #1 on: November 13, 2020, 05:13:29 PM »

We have three bronze lamp posts (with lamps) along our drive way.  They are powered by an underground 120vac that runs to each lamp along the driveway.  The lamp posts are mounted/instlalled in a concrete pad.  (the total distance is about 120 feet maybe less (about 30 to 40 feet between lamps)

My wife has requested that we consider wrapping the posts in a lighted (lite???) garland. 

I am looking for suggestions about how I might accomplish this.  Powering them from 120VAC is not viable since the power is supplied to each post underground through the bottom of the concrete pad.

What would be ok, would be a a battery powered garland that I could run off a timer or a remote controlled switch.  A dawn to dusk kind of thing would be ok, but I'd rather be able to turn them on and off remotely. 



I am supposing that the lights come on and turn off automatically? Dawn and Dusk? If so, where is the sensor?

Maybe there might be a plan there to tap into that.
Logged

Mike Luken 
 

Cherokee, Ia.
Former Iowa Patriot Guard Ride Captain
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #2 on: November 13, 2020, 05:36:13 PM »

No in this case the lamps are controlled by a switch inside the house.  I sort of like to be in control and leaving them on all night seemed like a waste of power.  

They are turned on when we go out at night or are expecting someone.  Otherwise they are off.  

And I know that begs the question about the garlands be "lite".  My wife and I will have to discuss this and see what the desired outcome is.

There is a small, but unlikely possibility that I could wire the garlands to the power in the lamp post via a hole drilled into the post and then tied to the lamp power.  

That would allow them to come on and be "powered".

Drawback is I don't really want drill the hole since I have no idea how it might affect the post's structure.

Right now I am sort of looking for ideas "brainstorming".   There are lots of ideas on here.   

« Last Edit: November 13, 2020, 05:37:56 PM by carolinarider09 » Logged

Oldfishguy
Member
*****
Posts: 721


central Minnesota


« Reply #3 on: November 13, 2020, 05:59:14 PM »

Does the top of the lamp post have a socket for the bulb?

https://www.amazon.com/Adapter-Splitter-Converts-Polarized-Outlet-UL/dp/B07Y4RBR4J/ref=asc_df_B07Y4RBR4J/?tag=hyprod-20&linkCode=df0&hvadid=385182567079&hvpos=&hvnetw=g&hvrand=7994643625854594130&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9020066&hvtargid=pla-824710463961&psc=1&tag=&ref=&adgrpid=80210700644&hvpone=&hvptwo=&hvadid=385182567079&hvpos=&hvnetw=g&hvrand=7994643625854594130&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9020066&hvtargid=pla-824710463961
Logged
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #4 on: November 13, 2020, 06:04:39 PM »

Yep.  Let me give that thing a look.

Ok, the issue would be getting the power out of the lamp housing.  This is the housing.

https://www.lightingdirect.com/troy-lighting-p6911-highland-park-1-light-15-post-light-with-iridescent-honey-glass/p524095

This is the post (discontinued now).

https://www.lightingdirect.com/hinkley-lighting-h6660-7-direct-burial-post-with-3-fitter-diameter/p2006745

Sorry I should have posted the links before. 
« Last Edit: November 13, 2020, 06:07:50 PM by carolinarider09 » Logged

Sorcerer
Member
*****
Posts: 550

Brooklyn Center MN.


« Reply #5 on: November 13, 2020, 06:13:06 PM »

I’d just run extension cords. I would doubt the garland has much of a power draw. I have a LED 2 bulb flood light on the side of our garage for the dog yard that I run off a remote controlled plug. Plugged into an outlet inside the garage with an extension cord to the light on the eve of the garage. The remote hangs on the wall by the deck door. Turn it on when the dogs go out at night or if we are doing something in the yard after dark. I believe I got the remotes at Costco or Menards, they came as 2 pack.
« Last Edit: November 13, 2020, 06:16:20 PM by Sorcerer » Logged
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #6 on: November 13, 2020, 06:31:16 PM »

Yes, remotes are the thing I was thinking about.   In fact I have one that I wanted to use for another purpose but have not done so.
Logged

Moonshot_1
Member
*****
Posts: 5111


Me and my Valk at Freedom Rock


« Reply #7 on: November 13, 2020, 06:44:33 PM »

Install one of these on each pole.

https://www.amazon.com/Pack-Grounded-Convenience-Electrical-Resistant/dp/B07P57RD66/ref=asc_df_B07P57RD66/?tag=hyprod-20&linkCode=df0&hvadid=397238247280&hvpos=&hvnetw=g&hvrand=17664588768800820921&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018203&hvtargid=pla-845593918276&psc=1&tag=&ref=&adgrpid=85332621073&hvpone=&hvptwo=&hvadid=397238247280&hvpos=&hvnetw=g&hvrand=17664588768800820921&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9018203&hvtargid=pla-845593918276

If you're handy at it, drill the hole. It will not impact the integrity of the pole unless you totally fubar it. (Been there done that) Run the wire. You'll have to come off of the light wiring but should be pretty basic.

You will have power out to your light posts with no extension cords.

Our light sensor for our outdoor light is on the post. Wired through a hole. The post beat back a tree falling on it a couple years back. Light fixture got creamed but the post is still there. Got another light for it.

120' is a lot of ground to cover with extension cords.
Logged

Mike Luken 
 

Cherokee, Ia.
Former Iowa Patriot Guard Ride Captain
Jess from VA
Member
*****
Posts: 30431


No VA


« Reply #8 on: November 13, 2020, 07:19:17 PM »

When you say light garlands, I think of Christmas lite strings (multi or color of choice).

None of those will stand up to weather over much time (which hasn't made many of my neighbors ever take them down anyway) (every neighborhood has these folks).  And the bulbs burn out, and some won't work with even one bulb out, so you get to check them ALL.  Though some will keep working with a bulb out.

I'm also thinking the nice poles will just get cruddy with the wires holding dirt, leaves, moisture and attracting bugs and spider webs, over time.

And I sure wouldn't fancy putting them up and taking them down, on occasion.  

It might be a nice look, for (pretty) occasional use.  But I wouldn't do it.  (but you don't live with me  Grin)

Compromise with colored light bulbs (but avoid red ones, some people might get the wrong idea)

« Last Edit: November 13, 2020, 07:34:29 PM by Jess from VA » Logged
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #9 on: November 13, 2020, 08:20:12 PM »

When you say light garlands, I think of Christmas lite strings (multi or color of choice).

None of those will stand up to weather over much time (which hasn't made many of my neighbors ever take them down anyway) (every neighborhood has these folks).  And the bulbs burn out, and some won't work with even one bulb out, so you get to check them ALL.  Though some will keep working with a bulb out.

I'm also thinking the nice poles will just get cruddy with the wires holding dirt, leaves, moisture and attracting bugs and spider webs, over time.

And I sure wouldn't fancy putting them up and taking them down, on occasion.  

It might be a nice look, for (pretty) occasional use.  But I wouldn't do it.  (but you don't live with me  Grin)

Compromise with colored light bulbs (but avoid red ones, some people might get the wrong idea)


Oh, I assumed he was talking for the holidays ?
Logged
Oss
Member
*****
Posts: 12606


The lower Hudson Valley

Ossining NY Chapter Rep VRCCDS0141


WWW
« Reply #10 on: November 14, 2020, 05:34:12 AM »

OMG  I thought it said Gavin for lamp post   Roll Eyes

Eyes are a bit fuzzy when i first get up
Logged

If you don't know where your going any road will take you there
George Harrison

When you come to the fork in the road, take it
Yogi Berra   (Don't send it to me C.O.D.)
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #11 on: November 14, 2020, 06:42:29 AM »

Well, the question was raised by my wife and I thought it was not just for the holidays.  I will have to investigate and see what her plans are.

We have garlands all over the front porch and around the door, but not out in the yard area. 

I will have to look and see if I can find a way to "support" the garlands around the post. 

Last night she mentioned a wreath instead of garlands.  So....

Drilling the hole and securing it from moisture is doable.  If I had my way, I'd put a small 12VCD power thingy in there to power the lights.  Draw back is that whenever the lights are powered so is the power supply even it is not connected to lights. 

I do think that is the best answer, beside just having them battery powered and having to turn them on manually locally or remotely. 

When I built the house, the need to power external things, outside of the homes interior was considered and a single switch turns power on and off to 120VAC outlet for garlands on the front and rear porch.  So, no plugging and unplugging is required.
Logged

Serk
Member
*****
Posts: 21824


Rowlett, TX


« Reply #12 on: November 14, 2020, 07:54:27 AM »

Solar maybe?

https://www.amazon.com/Yosoo-Powered-Artificial-Christmas-Valentines/dp/B07HM184ST

Logged

Never ask a geek 'Why?',just nod your head and slowly back away...



IBA# 22107 
VRCC# 7976
VRCCDS# 226

1998 Valkyrie Standard
2008 Gold Wing

Taxation is theft.

μολὼν λαβέ
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #13 on: November 14, 2020, 08:48:05 AM »

Solar is an option.  I will look.
Logged

carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #14 on: November 29, 2020, 10:50:29 AM »

We have temporary resolved the issue with a "battery powered" Garland we had used for another purpose but its lighting was different so....

We only have the one so, my wife wished it wrapped around the first lamp post as you enter the property.  Funny thing is that it takes "C" batteries and I only have one in stock.  Looks like a trip to the store (well wife is going on Monday).

In reality, since the electronics has a timer in it, I could add a solar re-charging thing and use a rechargeable power supply.  It would take some work but it could be done and I would know how it worked. 
Logged

Jersey mike
Member
*****
Posts: 10385

Brick,NJ


« Reply #15 on: November 29, 2020, 11:49:46 AM »

If the lamps take a standard bulb, you can get an adapter the screws in to the bulb socket with a plug and socket.

https://www.homedepot.com/p/Leviton-2-Outlet-White-Socket-with-Pull-Chain-R52-01406-00W/100200635

Logged
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #16 on: November 29, 2020, 11:56:40 AM »

Yes, the only issue is exiting the lamp housing with the wire which would require some drilling and well more work. 

I like the housing and posts to be sort of "standalone" items. 

Besides, its been twenty or thirty years since I built a solar power supply. 

Logged

Jersey mike
Member
*****
Posts: 10385

Brick,NJ


« Reply #17 on: November 29, 2020, 01:34:20 PM »

How do you access the bulb to change it?

 Is there a hinged door or a removable fake vent top section?

If I remember the wiring on Christmas lights is usually a very thin gauge, maybe 16 or 18, it’s the plug that’s an issue to snake through.



Logged
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #18 on: November 29, 2020, 02:15:36 PM »

Its got a cap on top that is held in place with a few screws and I could run a wire out that way but then I'd have this "wire" out of the top of the lamp. 

If I had thought about it a little more and if the wife had "suggested" that she would want a "wrap" on the poles I would have included an outlet at the base of each lamp for that purpose. 

I have considered doing that since I believe the 110VAC wiring is direct bury and all I have to do is to dig it up, cut and splice in the wire for the outlet and I have a new connection. 

But, more work.  And right now it works.... Grin
Logged

Gavin_Sons
Member
*****
Posts: 7109


VRCC# 32796

columbus indiana


« Reply #19 on: November 29, 2020, 06:07:09 PM »

OMG  I thought it said Gavin for lamp post   Roll Eyes

Eyes are a bit fuzzy when i first get up

I are pretty bright.   Cheesy
Logged

Moonshot_1
Member
*****
Posts: 5111


Me and my Valk at Freedom Rock


« Reply #20 on: November 29, 2020, 06:29:04 PM »

Candles. 100s of candles.

No wiring.
Logged

Mike Luken 
 

Cherokee, Ia.
Former Iowa Patriot Guard Ride Captain
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #21 on: November 29, 2020, 06:51:15 PM »

But I'd have to light them each evening.... 

 Cry
Logged

carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #22 on: November 30, 2020, 01:47:32 PM »

Lamp post example (Yes there is a source of power by the lamp post but only this one)



Lamp post at the drive entrance with the battery powered garland. 

Logged

Jess from VA
Member
*****
Posts: 30431


No VA


« Reply #23 on: November 30, 2020, 02:33:09 PM »

This reminds me of my brother's place (out on a country road). 

He won't put anything out there to identify his place, besides his mailbox with a single reflector on it (like every other house in the county).

If I arrive in daylight, I remember what it looks like.  But if I arrive at night, I could drive around all night looking for his (very long) driveway.  His buildings/home are way back off the road.
Logged
carolinarider09
Member
*****
Posts: 12439


Newberry, SC


« Reply #24 on: November 30, 2020, 03:29:51 PM »

Sort of the same, but in the fall, its easier to see the house from the road since the trees are naked (no leaves).

The house is about 50 yards from the main road.  There are three lights, like the one in the picture, along the driveway.  We turn them on if we are expecting someone, or, like now, for Christmas.   
Logged

Pages: [1]   Go Up
Print
Jump to: