Valkyrie Riders Cruiser Club
July 10, 2025, 01:24:50 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: 1 [2] 3   Go Down
Print
Author Topic: Give away to VRCC Riders.  (Read 13635 times)
Chrisj CMA
Member
*****
Posts: 14777


Crestview (Panhandle) Florida


« Reply #40 on: January 13, 2010, 05:27:01 AM »

If all my parts show up tomorrow...I will have some parts to toss in the pile.  Ill list the ones with minor damage on them first. 

--Valve cover....has tiny pepper marks from being too close to the gravel while she slid.....it never hit
                      the ground just got peppered a tad....if you busted one this will get you rolling again
--handlebars ....very small scratches on the right side.....so light, I almost didnt get a new one....
--Ultimate Passenger backrest....very slight tear in the backing material.......should be easy to fix if you
                                             do any upolstery at all
Fairly perfect items

--gas tankbase (the part the cap screws through
--one Original Cobra Light bar spot light with a 55W CB and a brow
--left side crash bar chrome is just not as sparkly as new, but looks good
--timing belt cover  chrome is just not as sparkly as new, but looks good
--Grip stuff: new throttle grip...end cap from clutch side
--fuel selector switch for the petcock



   I'll take the timing belt cover if you still have it.  I have a J&M 3 pocket windshield pouch to offer up.
Sorry its gone....
Logged
Chrisj CMA
Member
*****
Posts: 14777


Crestview (Panhandle) Florida


« Reply #41 on: January 13, 2010, 05:30:24 AM »

Ok guys and gals......the backrest,left crash bar and timing cover are spoken for......thanks  Smiley
Logged
Spirited-6
Member
*****
Posts: 2214


Nicholasville, Ky.


« Reply #42 on: January 13, 2010, 06:40:14 AM »

NOW, that`s more like it.  cooldude Keep it coming !!! Wink
Logged

Spirited-6
roboto65
Member
*****
Posts: 878


Conroe,TX


« Reply #43 on: January 13, 2010, 06:44:11 AM »

Not to take away from this but on another forum I visit we have a Pay in Forward section maybe we could have something like this for all when we have stuff to give to other members.
Logged

Allen Rugg                                                       
VRCC #30806
1999 Illusion Blue Valkyrie Interstate
1978 Kawasaki KZ 650 project
Chrisj CMA
Member
*****
Posts: 14777


Crestview (Panhandle) Florida


« Reply #44 on: January 13, 2010, 10:17:52 AM »

If all my parts show up tomorrow...I will have some parts to toss in the pile.  Ill list the ones with minor damage on them first. 

--Valve cover....has tiny pepper marks from being too close to the gravel while she slid.....it never hit
                      the ground just got peppered a tad....if you busted one this will get you rolling again
--handlebars ....very small scratches on the right side.....so light, I almost didnt get a new one....
--Ultimate Passenger backrest....very slight tear in the backing material.......should be easy to fix if you
                                             do any upolstery at all
Fairly perfect items

--gas tankbase (the part the cap screws through
--one Original Cobra Light bar spot light with a 55W CB and a brow
--left side crash bar chrome is just not as sparkly as new, but looks good
--timing belt cover  chrome is just not as sparkly as new, but looks good
--Grip stuff: new throttle grip...end cap from clutch side
--fuel selector switch for the petcock


Whover asked about the grips and end cap....I have the brand new throttle grip (no sleeve) and both end caps
Logged
Jess Tolbirt
Member
*****
Posts: 4720

White Bluff, Tn.


« Reply #45 on: January 13, 2010, 07:11:12 PM »

something i can give away is i have a leather strap that goes down the gas tank,, you know the one that fits around the gas cap and reaches from top to bottom? i think its about 6 inches wide or so.. has a little pouch thingy to put your cigs in too..
sorry i cant think what it is called but if some one wants it i will dig it out as soon as it warms up out there a little....
Jess,
 I would like to have this if you still have it. I will send you email

hey Scoot,,, my email to you was rejected,,,email me your address,,,,
Jess
Logged
doubletee
Member
*****
Posts: 1165


VRCC # 22269

Fort Wayne, IN


« Reply #46 on: January 14, 2010, 06:59:28 AM »

I have several things I can post for the giving. Just saw this thread today. I'll try to photograph them tonight and post them tomorrow.
Logged

  
T-Bird
Member
*****
Posts: 2487


A friend is one who takes me for what I am.

Cleveland, Tennessee


« Reply #47 on: January 14, 2010, 12:14:25 PM »




Quote
Guess I should apologize for not gettin' back to ya sooner. Got the levers. Thank you !
The only thing I've been able to find is a set of stock passenger pegs. If anyone wants them PM me your addy.





Hey Ron, If they haven't been spoken for I could use the left rear peg.  I also have 2 front turnsignal stems for someone, leftover from adding cobra spotlights to another bike.

Terry
Logged

Bladedog
Member
*****
Posts: 334


Lompoc, CA (Central Coast)


« Reply #48 on: January 14, 2010, 12:32:40 PM »




Quote
Guess I should apologize for not gettin' back to ya sooner. Got the levers. Thank you !
The only thing I've been able to find is a set of stock passenger pegs. If anyone wants them PM me your addy.





Hey Ron, If they haven't been spoken for I could use the left rear peg.  I also have 2 front turnsignal stems for someone, leftover from adding cobra spotlights to another bike.

Terry

Would those fit a Standard? Does that include the rubber "stay" between the fork clamp and the chrome part?
Logged

It's easier to get forgiveness than permission. 
T-Bird
Member
*****
Posts: 2487


A friend is one who takes me for what I am.

Cleveland, Tennessee


« Reply #49 on: January 14, 2010, 12:37:04 PM »




Quote
Guess I should apologize for not gettin' back to ya sooner. Got the levers. Thank you !
The only thing I've been able to find is a set of stock passenger pegs. If anyone wants them PM me your addy.




Hey Ron, If they haven't been spoken for I could use the left rear peg.  I also have 2 front turnsignal stems for someone, leftover from adding cobra spotlights to another bike.

Terry

Would those fit a Standard? Does that include the rubber "stay" between the fork clamp and the chrome part?
Yes....just don't have the screws that clamp them on with...must have used them on something else.
Logged

Bladedog
Member
*****
Posts: 334


Lompoc, CA (Central Coast)


« Reply #50 on: January 14, 2010, 04:26:38 PM »

T-Bird, sent you a PM.
Logged

It's easier to get forgiveness than permission. 
T-Bird
Member
*****
Posts: 2487


A friend is one who takes me for what I am.

Cleveland, Tennessee


« Reply #51 on: January 14, 2010, 06:47:28 PM »

Thanks Normandog,
 I'll send you my address.   cooldude

Blackdog,
 send me your address     cooldude

Terry
Logged

Bladedog
Member
*****
Posts: 334


Lompoc, CA (Central Coast)


« Reply #52 on: January 14, 2010, 10:08:47 PM »

Blackdog,
 send me your address     cooldude

Terry

I assume you meant me... lol.  Sending my address...
Logged

It's easier to get forgiveness than permission. 
doubletee
Member
*****
Posts: 1165


VRCC # 22269

Fort Wayne, IN


« Reply #53 on: January 15, 2010, 04:58:13 AM »



All from '99 Std:
Stock passenger foot pegs
Stock clutch and front brake levers (leather wraps can easily be removed)
Stock clutch and front brake master cylinder covers (includes stock screws)
Stock horn (bug guts included!)
« Last Edit: January 16, 2010, 05:09:05 AM by doubletee » Logged

  
GreenLantern57
Member
*****
Posts: 1543


Hail to the king baby!

Rock Hill, SC


« Reply #54 on: January 16, 2010, 06:49:17 PM »

Had light laydown. Have the right side mirror available for anyone. I broke the left and am going to replace with a different pair.
Here is a good pic on the J&P site. Remember, not new but it is in very good shape.

http://www.jpcycles.com/search/productdetail?sku=760-057&N=36370+28004526&Ntt=pro-one+mirror&Ntk=All&Ne=0&Nao=10&fitment=1&brand=0&results=100

Logged

grey ghost
Member
*****
Posts: 192


Taloga, Oklahoma


« Reply #55 on: January 17, 2010, 06:57:42 PM »

I am looking for a stock standard front seat for a valkyrie..rgoakes@yahoo.com
Logged
Smokinjoe-VRCCDS#0005
Member
*****
Posts: 13833


American by Birth, Southern by the Grace of God.

Beautiful east Tennessee ( GOD'S Country )


« Reply #56 on: January 17, 2010, 07:09:16 PM »

I am looking for a stock standard front seat for a valkyrie..rgoakes@yahoo.com

I've got one off a 1998 model they are kinda flat and uncomfortable the better one did'nt show-up to around 2000 .
« Last Edit: January 18, 2010, 04:30:00 AM by Smokinjoe-VRCCDS#0005 » Logged



I've seen alot of people that thought they were cool , but then again Lord I've seen alot of fools.
Cyclejohn
Member
*****
Posts: 146

Reidsville,N.C.


« Reply #57 on: January 18, 2010, 03:01:42 PM »

I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks,   John
Logged
Bladedog
Member
*****
Posts: 334


Lompoc, CA (Central Coast)


« Reply #58 on: January 18, 2010, 03:44:26 PM »

I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks,   John

I can use those!  Sending you a PM.

I also have a rear axle from a 2000 I/S if anyone needs it.
Logged

It's easier to get forgiveness than permission. 
grey ghost
Member
*****
Posts: 192


Taloga, Oklahoma


« Reply #59 on: January 18, 2010, 04:33:55 PM »

Joe, I think that it will work for me< the seat....grey ghost, will send you a email
Logged
Smokinjoe-VRCCDS#0005
Member
*****
Posts: 13833


American by Birth, Southern by the Grace of God.

Beautiful east Tennessee ( GOD'S Country )


« Reply #60 on: January 18, 2010, 04:48:58 PM »

Joe, I think that it will work for me< the seat....grey ghost, will send you a email

OK It will be friday before I can get it boxed and shipped. I work on the road and will be hitting said road here in a few.
Logged



I've seen alot of people that thought they were cool , but then again Lord I've seen alot of fools.
fudgie
Member
*****
Posts: 10613


Better to be judged by 12, then carried by 6.

Huntington Indiana


WWW
« Reply #61 on: January 19, 2010, 08:12:19 AM »

I have a black HJC fullface helmet with tinted shield for free. It L or XL, I'll have to look. Its in good shape except for the bottom. Its got a burn/melted edge, long story, approx 2" long. Can't see when on. Would make a good travel helmet, snowmobiling, or etc. Wore off and on for 3 yrs. Been on the shelf since 2000, covered.
« Last Edit: January 19, 2010, 08:13:52 AM by fudgie » Logged



Now you're in the world of the wolves...
And we welcome all you sheep...

VRCC-#7196
VRCCDS-#0175
DTR
PGR
Chrisj CMA
Member
*****
Posts: 14777


Crestview (Panhandle) Florida


« Reply #62 on: January 19, 2010, 01:36:05 PM »

Your parts are in the mail.....3-4 days or so cept Adrian, I mean Canada is like a whole different country and everything........lol  Grin
Logged
Willow
Administrator
Member
*****
Posts: 16631


Excessive comfort breeds weakness. PttP

Olathe, KS


WWW
« Reply #63 on: January 19, 2010, 01:43:31 PM »

We have a Leatherlyke left bag (old style) that has had the MarkT mod done.

We have a set of Leatherlyke bags with mounting hardware that are slightly cracked.  They can be repaired and should have the MarkT mod applied.
Logged
fudgie
Member
*****
Posts: 10613


Better to be judged by 12, then carried by 6.

Huntington Indiana


WWW
« Reply #64 on: January 19, 2010, 03:03:09 PM »

We have a Leatherlyke left bag (old style) that has had the MarkT mod done.

We have a set of Leatherlyke bags with mounting hardware that are slightly cracked.  They can be repaired and should have the MarkT mod applied.


MarkT mod?  ???
Logged



Now you're in the world of the wolves...
And we welcome all you sheep...

VRCC-#7196
VRCCDS-#0175
DTR
PGR
Willow
Administrator
Member
*****
Posts: 16631


Excessive comfort breeds weakness. PttP

Olathe, KS


WWW
« Reply #65 on: January 19, 2010, 03:21:36 PM »

MarkT mod?  ???


The older Leatherlyke bags had a tendency to crack at the mount points.  Mark Tobias reinforced his to circumvent this weakness.

MarkT's LeatherLyke Reinforcement Modification
Logged
Spirited-6
Member
*****
Posts: 2214


Nicholasville, Ky.


« Reply #66 on: January 20, 2010, 06:07:37 AM »

I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks,   John

Dang It. Missed these.  Sad anyone else have some tips laying around.  Grin
Logged

Spirited-6
scoot
Member
*****
Posts: 909


Lifes too short Ride it hard

Grand Rapids Mi.


« Reply #67 on: January 20, 2010, 08:17:50 AM »

I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks,   John

Dang It. Missed these.  Sad anyone else have some tips laying around.  Grin

I do. Email me your address, jklein@iserv.net ,and I will see if I can dig them up
Scott
Logged


Some like to ride Fat boys, I think I'll stay with the fat lady
Grumpy
Member
*****
Posts: 3106


Tampa, Fl


« Reply #68 on: January 20, 2010, 04:58:49 PM »

I have a rear brake rotor, fairly good shape, measures 8.3 mm thickness. Some very light grooves, not enough to cause a problem. I believe it is for an older model Valkyrie, bought it for My 99 interstate, and the offset is different. Some one have an idea what year it fits ?.Glad to give it to a new home, just decorating my shop wall now.
« Last Edit: January 22, 2010, 05:06:54 AM by Grumpy » Logged



Life is like a hot bath. It feels good while you’re in it, but the longer you stay in, the more wrinkled you get.
Spirited-6
Member
*****
Posts: 2214


Nicholasville, Ky.


« Reply #69 on: January 21, 2010, 06:20:37 AM »

I have a set of exhaust tips off my '97 tourer if anyone needs them. The're in great shape (not perfect - just great). Thanks,   John

Dang It. Missed these.  Sad anyone else have some tips laying around.  Grin

I do. Email me your address, jklein@iserv.net ,and I will see if I can dig them up
Scott

Thanks Scott. Address sent. Make sure you sent your addy with.  Wink
Logged

Spirited-6
GreenLantern57
Member
*****
Posts: 1543


Hail to the king baby!

Rock Hill, SC


« Reply #70 on: January 21, 2010, 07:25:02 PM »

Your parts are in the mail.....3-4 days or so cept Adrian, I mean Canada is like a whole different country and everything........lol  Grin
Part came in today!  wHOOO!!!!  Looks just like the right side. Bet I can spend some time with the polish and make it look just fine!  Thanks again! This board rocks!
Logged

Chrisj CMA
Member
*****
Posts: 14777


Crestview (Panhandle) Florida


« Reply #71 on: January 21, 2010, 07:36:25 PM »

Good Deal  cooldude  sounds like it found a happy home
Logged
Spirited-6
Member
*****
Posts: 2214


Nicholasville, Ky.


« Reply #72 on: January 22, 2010, 07:37:58 AM »

Valkyrie riders are doing "better" with the free stuff.  Wink We add bling / acc`s to our Valk.`s and put take off`s on the shelf. For what ? Are we going to put them back on ? I know you think you will list on Ebay and sell but have you ? Come on, make someone happy !  cooldude Thanks to all that have offered items.  angel

OOPS. In my haste in posting, I forgot I have a OEM drivers seat off my 98 Tourer that is a great shape. Anyone ???   Wink
« Last Edit: January 22, 2010, 08:57:21 AM by Spirited-6 » Logged

Spirited-6
Spirited-6
Member
*****
Posts: 2214


Nicholasville, Ky.


« Reply #73 on: January 22, 2010, 09:43:54 AM »

Seat gone to Mikey, VRCC 30782. Enjoy Mikey.  Wink
Logged

Spirited-6
Mikey
Member
*****
Posts: 427


Winona, MN


WWW
« Reply #74 on: January 22, 2010, 09:46:08 AM »

Thanks a bunch!  Smiley  I'm hoping to get me some chrome for my birthday so I can post something on here for y'all!
Logged

Remember folks, street lights timed for 35 mph are also timed for 70 mph
VRCC# 30782
doubletee
Member
*****
Posts: 1165


VRCC # 22269

Fort Wayne, IN


« Reply #75 on: January 23, 2010, 04:54:34 AM »



All from '99 Std:
Stock passenger foot pegs
Stock clutch and front brake levers (leather wraps can easily be removed)
Stock clutch and front brake master cylinder covers (includes stock screws)
Stock horn (bug guts included!)


Passenger foot pegs are gone.
Logged

  
Normandog
Member
*****
Posts: 1311



« Reply #76 on: January 25, 2010, 04:45:50 PM »




Quote
Guess I should apologize for not gettin' back to ya sooner. Got the levers. Thank you !
The only thing I've been able to find is a set of stock passenger pegs. If anyone wants them PM me your addy.





Hey Ron, If they haven't been spoken for I could use the left rear peg.  I also have 2 front turnsignal stems for someone, leftover from adding cobra spotlights to another bike.

Terry

FINALLy !!! Got them mailed today Terry. I sent both cause I couldn't tell which was one left and which one was the other left.  Undecided  Just keep the one you don't need, pass it on to someone else or bring it with you sometime when we're gonna be ridin.   cooldude
Logged

T-Bird
Member
*****
Posts: 2487


A friend is one who takes me for what I am.

Cleveland, Tennessee


« Reply #77 on: January 25, 2010, 05:27:59 PM »

Thanks Ron. Let me know how much I owe you for shipping.
Logged

Spirited-6
Member
*****
Posts: 2214


Nicholasville, Ky.


« Reply #78 on: January 27, 2010, 09:07:20 AM »

Thanks a bunch!  Smiley  I'm hoping to get me some chrome for my birthday so I can post something on here for y'all!

Mikey, sent you a Email and it bounced back. Seat sent UPS today. I have a track No.
Let me hear from you.  Wink
Logged

Spirited-6
Bladedog
Member
*****
Posts: 334


Lompoc, CA (Central Coast)


« Reply #79 on: January 27, 2010, 04:09:58 PM »

Just throwing this out there again in case someone needs it and missed it before... I have a rear axle from a 2000 I/S.
Logged

It's easier to get forgiveness than permission. 
Pages: 1 [2] 3   Go Up
Print
Jump to: