Valkyrie Riders Cruiser Club
November 20, 2025, 04:29:15 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Cilinderheads retorque at first (500 mile) service yes/no?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Cilinderheads retorque at first (500 mile) service yes/no?  (Read 1961 times)
Beer van Huet
Member
*****
Posts: 439


Netherlands


WWW
« on: January 06, 2010, 09:15:07 AM »
Hello folks,

I bought a new VN-900 for my wife (she thinks a Valk is too heavy) from a non-dealer and decided to do the service and maintenance myself. I was wondering whether or not the cilinder heads need to be retorqued. It doesn't say so in the manual, but if I put a new gasket in my car for instance, the cilinderhead need to be retorqued after a while. If not, why is there a difference?

TIA,

Beer
Logged
Ricky-D
Member
*****
Posts: 5031


South Carolina midlands
No
« Reply #1 on: January 06, 2010, 12:48:30 PM »
Depends upon the gasket!!

Most newer specie gaskets are made so that retorque is not required.

***
Logged
2000_Valkyrie_Interstate
Robert
Member
*****
Posts: 17398


S Florida
« Reply #2 on: January 06, 2010, 04:49:46 PM »
Second Rickys response cooldude
Logged
“Some people see things that are and ask, Why? Some people dream of things that never were and ask, Why not? Some people have to go to work and don’t have time for all that.”
R J
Member
*****
Posts: 13380


DS-0009 ...... # 173

Des Moines, IA
« Reply #3 on: January 07, 2010, 03:27:17 AM »
Quote from: Robert on January 06, 2010, 04:49:46 PM
Second Rickys response cooldude


BUT, if it makes you happy, go ahead......... Evil tickedoff
Logged
44 Harley ServiCar
 



 

valkyriemc
Member
*****
Posts: 392


2000 blu/slvr Interstate, 2018 Ultra Limited

NE Florida
« Reply #4 on: January 07, 2010, 01:49:04 PM »
If you re-torque head -you may need to eyeball valve adjust then.
Logged
Veteran USN '70-'76
daytona
Member
*****
Posts: 209


Port Orange, FL
« Reply #5 on: January 07, 2010, 02:04:05 PM »
The only head re-torque i've ever heard of is done on most Ducati's and or Aprilia's. The 800 mile which gets a valve adj after. Actually most metric bikes have the head studs that once torqued should never be retightened.
Logged
Just started!
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS