Valkyrie Riders Cruiser Club
June 19, 2025, 04:15:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Send this topic Print
Author Topic: No dash lights, no crank, but battery is good.  (Read 1221 times)
Boxcar01
Member
*****
Posts: 26


« on: April 05, 2022, 07:32:23 PM »

This just happened today. Put the key in and turned it lights came on as normal when I hit the starter there was a few quick ticks than nothing. The dash lights did not light up anymore. The battery appears to be good, the charger says 14.2 V and 0.23 Amps.

So right now nothing at all happens when the key is turned, no lights on the dashboard, no anything. Has anyone experienced something similar and if so what was the culprit? Thank you very much
Logged
RonW
Member
*****
Posts: 1867

Newport Beach


« Reply #1 on: April 05, 2022, 07:39:15 PM »

Did you check the fuse in the starter relay?
« Last Edit: April 05, 2022, 07:41:18 PM by RonW » Logged

2000 Valkyrie Tourer
dizzy
Member
*****
Posts: 14


« Reply #2 on: April 06, 2022, 04:57:32 AM »

Make sure battery terminals are tight. 
Logged
Jess from VA
Member
*****
Posts: 30401


No VA


« Reply #3 on: April 06, 2022, 05:31:33 AM »

Dirty (or deformed) starter switch is a common problem.

There's probably a thousand posts on it here. (some with DIY pics)

Tiny little parts.
Logged
jnicks01
Member
*****
Posts: 108


Clinton, IN


« Reply #4 on: April 06, 2022, 05:58:39 AM »

Still sounds like a battery to me seeing you had "clicks".  What does your multimeter say?  Not the charger.  What are your volts when cranking?
Logged

I want to scoop out your brains and eat your knowledge.

Boxcar01
Member
*****
Posts: 26


« Reply #5 on: April 06, 2022, 10:42:21 AM »

Make sure battery terminals are tight. 
Yep, that did it, tightened up the battery terminals and everything is back to normal.  Thanks all
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: