Valkyrie Riders Cruiser Club
June 18, 2025, 07:31:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Motor full of gas
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Motor full of gas  (Read 2130 times)
jdp
Member
*****
Posts: 446
« on: June 03, 2022, 03:00:41 PM »
My petcock is bad not OEM doesn’t have shut off and my motor filled up with gas no hydro lock yet but what’s the best way to flush all the gas out of my motor ?
Logged
Gondul
Member
*****
Posts: 258


VRCC #408

Central Florida
« Reply #1 on: June 03, 2022, 03:05:50 PM »
Pull all the spark plugs, put it in gear and start pushing... just watch for the spray of gas.
Logged
As the Government of the United States of America is not, in any sense, founded on the Christian religion....
John Adams - 1797

Because Thou lovest the Burning-ground,
I have made a Burning-ground of my heart
That Thou, Dark One, hunter of the Burning-ground,
Mayest dance Thy eternal dance.
da prez
Member
*****
Posts: 4354

. Rhinelander Wi. Island Lake Il.
« Reply #2 on: June 03, 2022, 03:47:23 PM »
Drain. Cheap oil filter. Check for hydro lock. If ok , fresh oil. Run for 10 or 15 minutes . Shut off and drain and refill with your regular oil
 F I X carbuerator issue. Or sell it to me.

                da prez
 
Logged
h13man
Member
*****
Posts: 1745


To everything there is an exception.

Indiana NW Central Flatlands
« Reply #3 on: June 05, 2022, 07:23:33 AM »
Pull the plugs, flush the cylinders, and change the oil. Add a Pingle valve and shut off after riding.
Logged
Chrisj CMA
Member
*****
Posts: 14757


Crestview (Panhandle) Florida
« Reply #4 on: June 05, 2022, 07:33:17 AM »
Quote from: h13man on June 05, 2022, 07:23:33 AM
Pull the plugs, flush the cylinders, and change the oil. Add a Pingle valve and shut off after riding.

And rebuild carburetors
Logged
h13man
Member
*****
Posts: 1745


To everything there is an exception.

Indiana NW Central Flatlands
« Reply #5 on: June 06, 2022, 06:52:23 AM »
Quote from: Chrisj CMA on June 05, 2022, 07:33:17 AM
Quote from: h13man on June 05, 2022, 07:23:33 AM
Pull the plugs, flush the cylinders, and change the oil. Add a Pingle valve and shut off after riding.

And rebuild carburetors

That too! Not much mention about conditions before this happening but float assembly rework for sure and if I read it right no shut off?  Huh?
« Last Edit: June 06, 2022, 06:54:40 AM by h13man » Logged
DeathWishBikerDude
Member
*****
Posts: 464
« Reply #6 on: June 25, 2022, 08:50:50 PM »
First thing I do when I buy a call is add a mingle peacock.
I've got a few extras just in case I buy another call.
Turn it off every time I park my bike.
Logged
jdp
Member
*****
Posts: 446
« Reply #7 on: July 06, 2022, 04:33:24 PM »
Carbs were fixed drained the motor full of gas but lucked out ran oil threw 3 times then add my regular oil but I should have drained the exhaust pipes they were full of gas and oil but it’s all good now back on the road looking for some Harley guys that want to ride ha
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS