Valkyrie Riders Cruiser Club
June 19, 2025, 01:19:37 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > TPMS
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: TPMS  (Read 1386 times)
shadowmagic
Member
*****
Posts: 229
« on: June 06, 2022, 03:14:34 PM »
So I installed a tiregard TPMS and it seems to be stuck and I'm unable to reset it. Anybody know how to do some sort of hard reset? all batteries are new and I've left the batteries out for half an hour but the same tire pressures appear even with the sensors off and no batteries installed. Any help greatly appreciated.
Logged
TrapperAH1G
Member
*****
Posts: 197

Toledo, WA
« Reply #1 on: June 06, 2022, 04:28:55 PM »


Unit will display the last PSI received until you start riding again.  It sometimes takes a mile or two before the sending units update data and display shows current PSI.

If that's not it, you may have to separate the sensors from the display unit beyond their range.  Last, remove batteries from sending units and display over night.  Reinstall sensor batteries and put them back on stems, then install display battery.

Good luck.
Logged
SunshineNomad
Member
*****
Posts: 37

Ft. Lauderdale


WWW
« Reply #2 on: June 06, 2022, 05:58:30 PM »
Mine has done that a couple times. I disconnected and reconnected and they worked.
Logged
"Keep thy eye on the tach, thine ears on the engine.
Lest thy whirlybits seek communion with the sun"
shadowmagic
Member
*****
Posts: 229
« Reply #3 on: June 06, 2022, 07:09:34 PM »
Thank you for the replies, I will ride it to work and see what happens.
Logged
shadowmagic
Member
*****
Posts: 229
« Reply #4 on: June 09, 2022, 04:31:17 AM »
Thank you guys for responding. you guys were right. I rode and it settled in and marked the correct the pressure.
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS