Valkyrie Riders Cruiser Club
June 19, 2025, 02:30:57 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Print
Author Topic: Rail Road Tracks and two horses' asses  (Read 1542 times)
Rams
Member
*****
Posts: 16161


So many colors to choose from yet so few stand out

Covington, TN


« on: July 18, 2024, 05:08:02 PM »

Any know if this is actually true.   I found it interesting.

The US standard railroad gauge (distance between the rails) is 4 feet, 8.5 inches. That's an exceedingly odd number. Why was that gauge used?

Well, because that's the way they built them in England, and English engineers designed the first US railroads. Why did the English build them like that?

Because the first rail lines were built by the same people who built the wagon tramways, and that's the gauge they used. So, why did 'they' use that gauge then?

Because the people who built the tramways used the same jigs and tools that they had used for building wagons, which used that same wheel spacing. Why did the wagons have that particular odd wheel spacing?

Well, if they tried to use any other spacing, the wagon wheels would break more often on some of the old, long distance roads in England. You see, that's the spacing of the wheel ruts. So who built those old rutted roads?

Imperial Rome built the first long distance roads in Europe (including England) for their legions. Those roads have been used ever since. And what about the ruts in the roads?

Roman war chariots formed the initial ruts, which everyone else had to match or run the risk of destroying their wagon wheels. Since the chariots were made for Imperial Rome, they were all alike in the matter of wheel spacing. Therefore, the United States standard railroad gauge of 4 feet, 8.5 inches is derived from the original specifications for an Imperial Roman war chariot. Bureaucracies live forever.

So the next time you are handed a specification/procedure/process and wonder 'What horse's ass came up with this?', you may be exactly right. Imperial Roman army chariots were made just wide enough to accommodate the rear ends of two war horses. (Two horses' asses.)

Now, the twist to the story:
When you see a Space Shuttle sitting on its launch pad, there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol at their factory in Utah. The engineers who designed the SRBs would have preferred to make them a bit fatter, but the SRBs had to be shipped by train from the factory to the launch site. The railroad line from the factory happens to run through a tunnel in the mountains, and the SRBs had to fit through that tunnel. The tunnel is slightly wider than the railroad track, and the railroad track, as you now know, is about as wide as two horses' behinds.

So, a major Space Shuttle design feature, of what is arguably the world's most advanced transportation system, was determined over two thousand years ago by the width of a horse's ass. And you thought being a horse's ass wasn't important? Ancient horse's asses control almost everything.

Rams  angel
« Last Edit: July 19, 2024, 05:30:47 AM by Rams » Logged

VRCC# 29981
Learning the majority of life's lessons the hard way.

Every trip is an adventure, enjoy it while it lasts.
sidecarwilliam
Member
*****
Posts: 90

SF Bay area


« Reply #1 on: July 18, 2024, 05:27:06 PM »

 2funny 2funny 2funny 2funny 2funny
Logged
carolinarider09
Member
*****
Posts: 12389


Newberry, SC


« Reply #2 on: July 18, 2024, 06:01:32 PM »

I think I heard that some years ago but would not have remembered if asked.

So, it sounds spot on.  Lots of stuff gets "designed" that way.

And no, I cannot off the top of my head, think of other examples. 


But.... while no where near the same, in nuclear power, when you quickly shut down the nuclear reactor it's called a SCRAM.   No the term does not come from how quickly the control rods are inserted into the reactor core.

It comes from the first reactor (December 2, 19420 in Chicago, IL (The Manhattan Project) where a set of emergency shutdown boron tipped rods were held in place above the reactor by a rope.  A "person" was stationed nearby with an axe, if needed, to quickly shutdown the reactor by cutting the rope with an axe. 

From the ink below:

The first fail-safe, the SCRAM (Single Control Rod Axe Man) method, involved twenty-nine control rods with boron tips that hung from a rope above the reactor. If the reaction went out of control, the reactor operator would chop the rope and the rods would fall into the reactor and poison the reaction. The rope was soon replaced with an electric winch that could raise or lower the safety rods (but the acronym remained).

Oh the Shutdown Control Rod Axe Man was named Norman Hilberry.

https://ahf.nuclearmuseum.org/ahf/history/safety/

Now you will find, if you do a search, that the NRC disagrees with the reality of the above statement.  However, I don't have that high of a regard for the NRC these days.   
Logged

scooperhsd
Member
*****
Posts: 5694

Kansas City KS


« Reply #3 on: July 18, 2024, 07:01:18 PM »

I'd heard that (about the tracks being 2 horses butts wide), but I hadn't heard of the Space Shuttle connection....
Logged
Rams
Member
*****
Posts: 16161


So many colors to choose from yet so few stand out

Covington, TN


« Reply #4 on: July 18, 2024, 08:03:31 PM »

I'd heard that (about the tracks being 2 horses butts wide), but I hadn't heard of the Space Shuttle connection....

Hadn't heard of the NASA connection before but, having lived much of my younger years living near Wichita, KS where Boeing has a huge facility, I remember seeing partially assembled aircraft bodies on flat bed rail cars headed to Seattle for final assembly.   Was told that when Boeing started producing very large aircraft bodies, the trains carrying those bodies had to be re-routed due to tunnels.    Again, I don't know that is factual, that was way back in another life.

Rams
Logged

VRCC# 29981
Learning the majority of life's lessons the hard way.

Every trip is an adventure, enjoy it while it lasts.
John Schmidt
Member
*****
Posts: 15194


a/k/a Stuffy. '99 I/S Valk Roadsmith Trike

De Pere, WI (Green Bay)


« Reply #5 on: July 19, 2024, 09:49:48 AM »

A nurse once told me the name of the guy that invented the hospital gown, you know the one...it leaves your butt exposed. His name according to her was Seymor Hinnie!  2funny

While recovering from my major heart attack 12 yrs. ago, I would take short walks up/down the hallway outside my room which took me past the nurses station. If I was exposed in back I always got applause as I passed, to which I would bow in acceptance and sometimes in fun a couple of them would toss either a flower or pennies. One day I decided to put a second gown on backwards so as to cover the backside. Upon passing the station I got a chorus of boos in place of cheers and applause. Those gals had a big impact on my recovery and 5 yrs. later I paid a visit to the same floor. All but one was still there and they remembered me and the interaction we had.  cooldude
Logged

Rams
Member
*****
Posts: 16161


So many colors to choose from yet so few stand out

Covington, TN


« Reply #6 on: July 19, 2024, 12:27:13 PM »

A nurse once told me the name of the guy that invented the hospital gown, you know the one...it leaves your butt exposed. His name according to her was Seymor Hinnie!  2funny

While recovering from my major heart attack 12 yrs. ago, I would take short walks up/down the hallway outside my room which took me past the nurses station. If I was exposed in back I always got applause as I passed, to which I would bow in acceptance and sometimes in fun a couple of them would toss either a flower or pennies. One day I decided to put a second gown on backwards so as to cover the backside. Upon passing the station I got a chorus of boos in place of cheers and applause. Those gals had a big impact on my recovery and 5 yrs. later I paid a visit to the same floor. All but one was still there and they remembered me and the interaction we had.  cooldude

John, when you had that gown on backwards, you had a chance to make more than pennies.   2funny

Rams
Logged

VRCC# 29981
Learning the majority of life's lessons the hard way.

Every trip is an adventure, enjoy it while it lasts.
Jess from VA
Member
*****
Posts: 30401


No VA


« Reply #7 on: July 19, 2024, 01:27:15 PM »

I always heard the traditional open back hospital gown was referred to as the "humiliation gown."

Once they stick you in one, all dignity is lost, and you will just shuffle around and follow all orders meekly.

When they gave me one, I took it off and wrapped and tied it around my waist like a towel (with nothing but my bare chest and knees showing).  

Me Tarzan, you (nurse) Jane.   Grin

You can give Tarzan a bed bath, but if you wash his happy place you're going to get a surprise.   2funny

« Last Edit: July 19, 2024, 01:33:08 PM by Jess from VA » Logged
John Schmidt
Member
*****
Posts: 15194


a/k/a Stuffy. '99 I/S Valk Roadsmith Trike

De Pere, WI (Green Bay)


« Reply #8 on: July 19, 2024, 02:44:49 PM »

A nurse once told me the name of the guy that invented the hospital gown, you know the one...it leaves your butt exposed. His name according to her was Seymor Hinnie!  2funny

While recovering from my major heart attack 12 yrs. ago, I would take short walks up/down the hallway outside my room which took me past the nurses station. If I was exposed in back I always got applause as I passed, to which I would bow in acceptance and sometimes in fun a couple of them would toss either a flower or pennies. One day I decided to put a second gown on backwards so as to cover the backside. Upon passing the station I got a chorus of boos in place of cheers and applause. Those gals had a big impact on my recovery and 5 yrs. later I paid a visit to the same floor. All but one was still there and they remembered me and the interaction we had.  cooldude

John, when you had that gown on backwards, you had a chance to make more than pennies.   2funny

Rams
Ron, no chance of that happening. It was a second gown worn over the first one, that way nothing was open for "inspection" or applause.  Wink
Logged

Rams
Member
*****
Posts: 16161


So many colors to choose from yet so few stand out

Covington, TN


« Reply #9 on: July 19, 2024, 02:46:57 PM »

A nurse once told me the name of the guy that invented the hospital gown, you know the one...it leaves your butt exposed. His name according to her was Seymor Hinnie!  2funny

While recovering from my major heart attack 12 yrs. ago, I would take short walks up/down the hallway outside my room which took me past the nurses station. If I was exposed in back I always got applause as I passed, to which I would bow in acceptance and sometimes in fun a couple of them would toss either a flower or pennies. One day I decided to put a second gown on backwards so as to cover the backside. Upon passing the station I got a chorus of boos in place of cheers and applause. Those gals had a big impact on my recovery and 5 yrs. later I paid a visit to the same floor. All but one was still there and they remembered me and the interaction we had.  cooldude

John, when you had that gown on backwards, you had a chance to make more than pennies.   2funny

Rams
Ron, no chance of that happening. It was a second gown worn over the first one, that way nothing was open for "inspection" or applause.  Wink

Well, no wonder the nurses booed................ 2funny

Rams
Logged

VRCC# 29981
Learning the majority of life's lessons the hard way.

Every trip is an adventure, enjoy it while it lasts.
Pages: [1]   Go Up
Print
Jump to: