Valkyrie Riders Cruiser Club
July 17, 2025, 04:51:40 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Pages: [1]   Go Down
Send this topic Print
Author Topic: trigger wheel info  (Read 1288 times)
989
Guest
« on: July 01, 2010, 09:39:48 PM »

was wondering if any one can tell me where i can get a 4 degree trigger wheel for my 98 tourer. any info will be great. thanks for looking.


thanks again
989
Logged
Kymbo
Member
*****
Posts: 229


South Australia


« Reply #1 on: July 01, 2010, 10:53:51 PM »

Ebay would be a good start
Logged
Tundra
Member
*****
Posts: 3882


2014 Valkyrie 1800

Seminole, Florida


« Reply #2 on: July 02, 2010, 03:16:30 AM »

http://www.directlineparts.com/byProduct.asp?prd=TRIGGER+WHEELS&str=2
Logged

If you can't be a good example: be a WARNING!!
98valk
Member
*****
Posts: 13501


South Jersey


« Reply #3 on: July 02, 2010, 03:34:26 AM »

best thing to do is to modify your OEM one, or buy another OEM to mod.
search the archives on how to mod one.
Logged

1998 Std/Tourer, 2007 DR200SE, 1981 CB900C  10speed
1973 Duster 340 4-speed rare A/C, 2001 F250 4x4 7.3L, 6sp

"Our Constitution was made only for a Moral and Religious people. It is wholly inadequate to the goverment of any other."
John Adams 10/11/1798
Robert
Member
*****
Posts: 17028


S Florida


« Reply #4 on: July 02, 2010, 09:18:54 AM »

I agree with CA on this modify the oem one and you can put it any way you like it. The mod only requires to file off a really small amount of metal off the one edge of the wheel, and when you put it back on make sure it sits correctly. After market wheels have had some problems when mixed with a dyna ignition but with factory it was ok.
Logged

“Some people see things that are and ask, Why? Some people dream of things that never were and ask, Why not? Some people have to go to work and don’t have time for all that.”
Pages: [1]   Go Up
Send this topic Print
Jump to: