Valkyrie Riders Cruiser Club
July 27, 2025, 09:32:31 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Send this topic Print
Author Topic: One more question  (Read 1185 times)
lucky_1_chris
Member
*****
Posts: 428


Arlington, TX


« on: April 09, 2011, 12:42:51 PM »

One more question guys. I'm about to have my tires mounted. After a double check of the bearings I found that I have the same bearing on both sides of the rear wheel. 6204. Is this ok? The collar is a little on the loose side, but it makes constant contact with both bearings. It's no looser than the fronts. Dust seal is in and fits flush with the edge of the lip. The flange side is an oem bearing, and the other side is not. It's blue so all balls maybe... Am I ok with this setup, or should I get new bearings and a collar? Thanks.
Logged

1999 Valkyrie Interstate

2016 Victory Cross Country Tour
X Ring
Member
*****
Posts: 3626


VRCC #27389, VRCCDS #204

The Landmass Between Mobile And New Orleans


« Reply #1 on: April 09, 2011, 01:10:31 PM »

Your dust seal is on the left bearing?  There's not enough room for a double row bearing and a dust seal in the left bearing pocket unless the previous owner had the pocket deepened.  Just so you know the rear wheel uses a 6204 bearing on the left side and a 5204 on the right.  The 6204 bearing is also used in the front wheels except for 97 Valks which use 6004 bearings.

If you want more info on the double row wheel bearing, read my article in Shop Talk.  http://www.valkyrieriders.com/shoptalk/5204_bearing_mod.pdf

Marty
« Last Edit: April 09, 2011, 01:14:48 PM by X Ring » Logged

People are more passionately opposed to wearing fur than leather because it's safer to harass rich women than bikers.           
lucky_1_chris
Member
*****
Posts: 428


Arlington, TX


« Reply #2 on: April 09, 2011, 01:30:46 PM »

Your dust seal is on the left bearing?  There's not enough room for a double row bearing and a dust seal in the left bearing pocket unless the previous owner had the pocket deepened.  Just so you know the rear wheel uses a 6204 bearing on the left side and a 5204 on the right.  The 6204 bearing is also used in the front wheels except for 97 Valks which use 6004 bearings.

If you want more info on the double row wheel bearing, read my article in Shop Talk.  http://www.valkyrieriders.com/shoptalk/5204_bearing_mod.pdf

Marty


Now you've got me doubting myself. Let me look again in a few minutes when I pick the wheels up.
Logged

1999 Valkyrie Interstate

2016 Victory Cross Country Tour
lucky_1_chris
Member
*****
Posts: 428


Arlington, TX


« Reply #3 on: April 09, 2011, 01:43:41 PM »

Your dust seal is on the left bearing?  There's not enough room for a double row bearing and a dust seal in the left bearing pocket unless the previous owner had the pocket deepened.  Just so you know the rear wheel uses a 6204 bearing on the left side and a 5204 on the right.  The 6204 bearing is also used in the front wheels except for 97 Valks which use 6004 bearings.

If you want more info on the double row wheel bearing, read my article in Shop Talk.  http://www.valkyrieriders.com/shoptalk/5204_bearing_mod.pdf

Marty


Well, I'm an idiot. It's a 5204 on the right, 6204 on left. Duh. Little grease on it and I thought it was 6204. Please disregard... Embarrassed
Logged

1999 Valkyrie Interstate

2016 Victory Cross Country Tour
Pages: [1]   Go Up
Send this topic Print
Jump to: