Valkyrie Riders Cruiser Club
August 23, 2025, 04:38:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > 97 Running way too lean
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: 97 Running way too lean  (Read 1313 times)
freud1au
Member
*****
Posts: 4
« on: June 17, 2011, 05:35:14 PM »
Was running a bit lean before I fitted cobra six into six pipes.
Gave it a quick Dino after because she would not run under load above 2000rpm.
Ran fine under 2k at 12ppm but above 2k was 18ppm.
I ordered and fitted the cobra jet kit. Came only with needeles springs etc but no jets.
Re dyno and now at 16ppm. When I spoke to the dyno guy he told me that normally the kit comes with a drill to drill out to aloe the diaphragms to lift earlier in rpm.
Does anyone know what the size of the drill is and what size jets I should be running?
I turned my plugs white in under 50 miles
Logged
designer
Member
*****
Posts: 413


Columbus, Ohio
« Reply #1 on: June 17, 2011, 07:15:23 PM »
Got a pic of plugs. My plugs are always white and it's only has K&N with pre-filter. No other running mod.
Logged
2002 Valkyrie Std
K&N Filter, Audiovox Cruise, I/S bags and trunk, Cee Bailey shield +2, ECT mod, radiator pods, driving lights, rattlebars kick shifter ,I/S ICM
wizard -vrccds#125
Member
*****
Posts: 589


Hitchcock Tx.
« Reply #2 on: June 17, 2011, 07:35:34 PM »
I am running 112.5 main jets with the C-clips one from the top. 6 deg trigger wheel and I/S ECM. Twist it at 5MPH and it  will light up a 205 CT. Main jets I got at the local H-D dealer (thy said thy would work ) but what do thy know  uglystupid2       
Logged
freud1au
Member
*****
Posts: 4
« Reply #3 on: June 17, 2011, 07:45:48 PM »
Wiz did you drill the vacuume for the slides? If so what size.

No photo of the plugs. By white I mean from shiny silver new plugs to paper white in less than half a tank

Logged
designer
Member
*****
Posts: 413


Columbus, Ohio
« Reply #4 on: June 18, 2011, 06:20:49 AM »
Yeah, little lean.
Logged
2002 Valkyrie Std
K&N Filter, Audiovox Cruise, I/S bags and trunk, Cee Bailey shield +2, ECT mod, radiator pods, driving lights, rattlebars kick shifter ,I/S ICM
wizard -vrccds#125
Member
*****
Posts: 589


Hitchcock Tx.
« Reply #5 on: June 18, 2011, 07:01:53 AM »
Did not need to drill anything ! Just a good cleaning !
Logged
freud1au
Member
*****
Posts: 4
« Reply #6 on: June 21, 2011, 09:27:39 PM »
Ok I will make a set of 112.5 jets. See how we go from there.
Where did you get  the six deg from
Logged
freud1au
Member
*****
Posts: 4
« Reply #7 on: June 22, 2011, 03:08:43 AM »
Ok 112.5 still too small
Ended up 117's
Duck me I thought she went before but now. Wow
Thanks wiz for the info to start me off
Logged
wizard -vrccds#125
Member
*****
Posts: 589


Hitchcock Tx.
« Reply #8 on: June 22, 2011, 01:46:51 PM »
You are welcome !  cooldude I am still tinkering with the other one and almost got it ! uglystupid2     
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS