Valkyrie Riders Cruiser Club
August 21, 2025, 04:39:55 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Timing belts... somthing different?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Timing belts... somthing different?  (Read 1414 times)
Jeff K
Member
*****
Posts: 3071
« on: November 11, 2011, 01:33:28 PM »
I had someone call me today and said that they bought the gates replacement belts at Napa and they are 1/4" narrower than the stock belts. ?????
Anyone ever see that? I don't have a stock belt to compare it to.
Logged
hager the horrible
Member
*****
Posts: 96


florence co
« Reply #1 on: November 11, 2011, 01:51:14 PM »
Just measured my old stock belts from my 2000 interstate .664 in wide didnt know why
I saved them must have been to answer your post hope this is of help

Darby
Logged
Chrisj CMA
Member
*****
Posts: 14808


Crestview (Panhandle) Florida
« Reply #2 on: November 11, 2011, 01:54:36 PM »
I bought after market belts and they were identical....you may have been sold the wrong part
Logged
Jeff K
Member
*****
Posts: 3071
« Reply #3 on: November 11, 2011, 03:31:29 PM »
Quote from: Chrisj CMA on November 11, 2011, 01:54:36 PM
I bought after market belts and they were identical....you may have been sold the wrong part

Twas not me. It was a guy who called me. I told him I never saw any difference. I also suggested that he may have been given the wrong belts.
Logged
GOOSE
Member
*****
Posts: 704


D.S. #: 1643

Southwest Virginia
« Reply #4 on: November 11, 2011, 07:15:38 PM »
JEFF K...gates belts are made in germany, and england......the one that guy got was made in china.
Logged
Brian
Member
*****
Posts: 996


Monroe, NC
« Reply #5 on: November 13, 2011, 07:17:33 PM »
I used the cross reference part numbers listed on this site for the NAPA/Gates belts. The belt was identical in width the the OEM.
Logged
Jeff K
Member
*****
Posts: 3071
« Reply #6 on: November 14, 2011, 04:36:27 AM »
I got a call back from him. They gave him the wrong belt. It's all good now.
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS