Valkyrie Riders Cruiser Club
November 24, 2025, 05:47:12 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > 5204 dbl w/rubber shields rear wheel bearing costs $15 vs $58
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: 5204 dbl w/rubber shields rear wheel bearing costs $15 vs $58  (Read 1449 times)
F6MoRider
Member
*****
Posts: 294


Lakeland, FL
« on: April 24, 2012, 02:33:10 PM »
So I think I have to do the bearing fix (squeak, squeak, squeak...) and I find a wholesaler here in town and stop in.  They want $58 for the bearing.  I'm surprised by the price diff based on the list in the shoptalk document.  

I go back on line and find another supplier here in town.  USA bearing and belts.  The same bearing is $15 bucks.  

http://www.usabearingsandbelts.com/m7/5204--5204-2rs-5204-zz-premium-double-row-ball-bearings-20x47x20-6.html

We should have a section on the site for low cost suppliers and those worth the higher prices.

BTW: No hydro lock today.


Still hard to believe the price difference.
Logged
VRCC #4086
2000 Valk Standard dressed with matching Interstate Bags and the Hondaline shield.
Tropic traveler
Member
*****
Posts: 3117


Livin' the Valk, er, F6B life in Central Florida.

Silver Springs, Florida
« Reply #1 on: April 24, 2012, 08:00:02 PM »
5204-2RS bearing $19.99 with free shipping from E-bay. I think it was from a bearing house located in Lakeland FL. Made in Japan which is choice 1A for me, with Made in USA choice 1.
That would be $40 for 2 plus whatever it costs you to cut down a stock spacer.
Of course Bill (Grumpy) who is a sponsor vendor of this site has the new double row ready spacers for sale too.
Great guy! check him out.  cooldude

BTW, my local CarQuest store wanted $60+ for the same bearing. 
Logged
'13 F6B black-the real new Valkyrie Tourer
'13 F6B red for Kim
'97 Valkyrie Tourer r&w, OLDFRT's ride now!
'98 Valkyrie Tourer burgundy & cream traded for Kim's F6B
'05 SS 750 traded for Kim's F6B
'99 Valkyrie black & silver Tourer, traded in on my F6B
'05 Triumph R3 gone but not forgotten!
X Ring
Member
*****
Posts: 3626


VRCC #27389, VRCCDS #204

The Landmass Between Mobile And New Orleans
« Reply #2 on: April 24, 2012, 08:24:03 PM »
Who made the bearings and what tier manufacturer are they?  Those are the two questions you need to ask.  Bearing are one of those things I believe you do not decide by price alone.  Do your research.  I would buy Timken if they made a 3204-2RS but they don't.  SKF is a top tier manufacturer.  I don't think I will ever have to replace those bearing.  Something else you need check is what are the bearing cages made from.  Some 3204/5204 bearings use plastic cages.  They are not compatible with use in a motorcycle wheel.  You need steel cages. 

Marty 
Logged
People are more passionately opposed to wearing fur than leather because it's safer to harass rich women than bikers.           
Tailgate Tommy
Member
*****
Posts: 1438


2000 Interstate, 2001 Interstate and 2003 Standard

Fort Collins, Colorado
« Reply #3 on: April 25, 2012, 06:30:14 PM »
Quote from: Tropic traveler on April 24, 2012, 08:00:02 PM
5204-2RS bearing $19.99 with free shipping from E-bay. I think it was from a bearing house located in Lakeland FL. Made in Japan which is choice 1A for me, with Made in USA choice 1.
That would be $40 for 2 plus whatever it costs you to cut down a stock spacer.
Of course Bill (Grumpy) who is a sponsor vendor of this site has the new double row ready spacers for sale too.
Great guy! check him out.  cooldude

BTW, my local CarQuest store wanted $60+ for the same bearing. 

+1 on Bill. Great product and a stand up guy!
Logged
F6MoRider
Member
*****
Posts: 294


Lakeland, FL
« Reply #4 on: April 26, 2012, 06:01:23 AM »
Picked up two yesterday at the Lakeland bearing house.  And, no, they weren't plastic nor were they made from anything else substandard.  Will put one on my spare rim and ship my spare spacer off to Grumpy for sizing then put one on the bike as soon as I get time.

Anyone ever try greasing the bearing?
« Last Edit: April 26, 2012, 06:03:04 AM by F6MoRider » Logged
VRCC #4086
2000 Valk Standard dressed with matching Interstate Bags and the Hondaline shield.
X Ring
Member
*****
Posts: 3626


VRCC #27389, VRCCDS #204

The Landmass Between Mobile And New Orleans
« Reply #5 on: April 26, 2012, 06:40:44 AM »
It's not the outside that would be plastic.  Inside the bearing are cages that hold the ball bearings in place.  That can be made of plastic.  If it is it is unsuitable for use in the wheels.

Marty
Logged
People are more passionately opposed to wearing fur than leather because it's safer to harass rich women than bikers.           
F6MoRider
Member
*****
Posts: 294


Lakeland, FL
« Reply #6 on: April 26, 2012, 10:28:55 AM »
Seals pop out easily and the insides were checked.
Logged
VRCC #4086
2000 Valk Standard dressed with matching Interstate Bags and the Hondaline shield.
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS