Valkyrie Riders Cruiser Club
August 13, 2025, 07:23:06 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Axles interchangeable?
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Axles interchangeable?  (Read 1071 times)
fiddle mike
Member
*****
Posts: 1148


Nothing exceeds like excess.

Corpus Christi, TX


WWW
« on: September 19, 2012, 01:06:20 AM »
Front axles for early and later Valks  have different part numbers.  Will the later ones (2000) fit my '97 Standard?
Logged
Disco
Member
*****
Posts: 4901


Armed Man=Citizen; Unarmed Man=Subject

Republic of Texas
« Reply #1 on: September 19, 2012, 03:18:46 AM »
Yes.
Logged
2000 Bumblebee "Tourer", 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K
71 Suzuki MT50 Trailhopper


VRCC 27,916                   IBA 44,783
Patrick
Member
*****
Posts: 15433


VRCC 4474

Largo Florida
« Reply #2 on: September 19, 2012, 07:17:01 AM »
When did the part number change ??  The 97s used a smaller bearing,, but,, I don't remember what about the bearing was smaller..
Logged
fiddle mike
Member
*****
Posts: 1148


Nothing exceeds like excess.

Corpus Christi, TX


WWW
« Reply #3 on: September 19, 2012, 08:29:46 AM »
Quote from: Patrick on September 19, 2012, 07:17:01 AM
When did the part number change ??  The 97s used a smaller bearing,, but,, I don't remember what about the bearing was smaller..

The number changes 1999. 
Logged
Patrick
Member
*****
Posts: 15433


VRCC 4474

Largo Florida
« Reply #4 on: September 19, 2012, 03:25:08 PM »
Well, if 97 to 99 axles are the same then maybe they are all the same,, I'm not aware of any changes in the later years.. But,, I don't know for sure..
Logged
Disco
Member
*****
Posts: 4901


Armed Man=Citizen; Unarmed Man=Subject

Republic of Texas
« Reply #5 on: September 19, 2012, 03:31:51 PM »
The '97 front 6004 bearing is 42mm in outer diameter, 12mm thick, and has a 20mm hole.  

The '98-'03 front 6204 bearing is 47mm in outer diameter, 14mm thick, and has the same 20mm hole.
Logged
2000 Bumblebee "Tourer", 98 Yellow & Cream Tourer, 97 Rescue blower bike
22 CRF450RL, 19 BMW R1250RT
78 CB550K
71 Suzuki MT50 Trailhopper


VRCC 27,916                   IBA 44,783
fiddle mike
Member
*****
Posts: 1148


Nothing exceeds like excess.

Corpus Christi, TX


WWW
« Reply #6 on: September 19, 2012, 04:58:30 PM »
Quote from: Disco on September 19, 2012, 03:31:51 PM
The '97 front 6004 bearing is 42mm in outer diameter, 12mm thick, and has a 20mm hole.  

The '98-'03 front 6204 bearing is 47mm in outer diameter, 14mm thick, and has the same 20mm hole.



Thanks.  cooldude
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS