Valkyrie Riders Cruiser Club
July 27, 2025, 10:01:10 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Send this topic Print
Author Topic: Front forks --- Interchange ?  (Read 813 times)
gregk
Member
*****
Posts: 794

Retired

Chippewa Falls, wi.


« on: July 22, 2013, 08:15:30 PM »

Is their any front forks that interchange with the I/S still in existance, cause If i keep this bike I'm going to need 2 forks complete.
Logged
Westsider
Member
*****
Posts: 716


Fort Worth TX.


« Reply #1 on: July 23, 2013, 03:31:41 PM »

The VTX 1800 look identical,from work parking lot, but don't know for a fact. I would like to know.



If they do, it would open up lots of front wheel options.....
« Last Edit: July 23, 2013, 03:34:35 PM by Westsider » Logged

we'll be there when we get there -   Valkless,, on lookout....
BonS
Member
*****
Posts: 2198


Blue Springs, MO


WWW
« Reply #2 on: July 23, 2013, 03:33:06 PM »

Greg, check you PM.
Logged

Westsider
Member
*****
Posts: 716


Fort Worth TX.


« Reply #3 on: July 24, 2013, 04:37:20 AM »

Find any??? ???  ???
Logged

we'll be there when we get there -   Valkless,, on lookout....
sandy
Member
*****
Posts: 5396


Mesa, AZ.


« Reply #4 on: July 24, 2013, 06:56:36 AM »

The VTX 1800 forks are able to be mounted on a Valk, but then mounting the wheel would be a problem. The VTX uses a digital speedo sender. I don't know about the width between the forks. Fender mount bolts are different. VTX forks are about 3/4" longer.
Logged

Westsider
Member
*****
Posts: 716


Fort Worth TX.


« Reply #5 on: July 24, 2013, 08:58:02 AM »

Do they fit in the valk triple tree's or do you have to have the vtx tree's? Thanks ,,


Good info for rescue / rebuild
« Last Edit: July 24, 2013, 09:02:44 AM by Westsider » Logged

we'll be there when we get there -   Valkless,, on lookout....
sandy
Member
*****
Posts: 5396


Mesa, AZ.


« Reply #6 on: July 24, 2013, 01:58:16 PM »

VTX forks are the same diameter so they should fit.
Logged

Pages: [1]   Go Up
Send this topic Print
Jump to: