Valkyrie Riders Cruiser Club
July 22, 2025, 06:42:32 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Pages: [1]   Go Down
Send this topic Print
Author Topic: grabrail bolt sizes?  (Read 633 times)
whitewater
Member
*****
Posts: 11


mohican state forest overlook (2000 tourer)

North Central Ohio, just down from Mid-Ohio raceway


« on: February 23, 2014, 04:24:46 PM »

I pulled off saddle bags,backrest and rear seat, grab rail bolts are too long now, any help on the size  and availability? lowes, home depot ?
Logged

I've forgotten yesterday but remember the past and look forward to tomorrow
pancho
Member
*****
Posts: 2113


Bonanza Arkansas


« Reply #1 on: February 23, 2014, 04:43:42 PM »

I believe the rear ones are 8X45, and the front ones are 10X50 with nothing else mounted there. Any bolt and screw place.
Logged

The most expensive things you will purchase, are those things you would not have needed if you had listened and obeyed.
whitewater
Member
*****
Posts: 11


mohican state forest overlook (2000 tourer)

North Central Ohio, just down from Mid-Ohio raceway


« Reply #2 on: February 23, 2014, 04:54:36 PM »

Thanks Pancho, Sure appreciate the help! I'm headed next month to daytona bike week, I just gotta get out of this snow here in Ohio. Thought I'd Go solo on the old girl and needed the sizes so I could get to Mr. Bolt in the A. M. to pick up the bolts to finish out the little project. Thanks again.
Logged

I've forgotten yesterday but remember the past and look forward to tomorrow
pancho
Member
*****
Posts: 2113


Bonanza Arkansas


« Reply #3 on: February 23, 2014, 05:04:04 PM »

You bet,,, I would like to be going with you brother,, been awhile since I last went.  That will be a nice escape from winter in Ohio.  Ride safe
Logged

The most expensive things you will purchase, are those things you would not have needed if you had listened and obeyed.
sandy
Member
*****
Posts: 5394


Mesa, AZ.


« Reply #4 on: February 23, 2014, 06:13:09 PM »

The 8 is a 1.25 pitch. The 10 is the same pitch, 1.25 ( fine thread).
Logged

John Schmidt
Member
*****
Posts: 15236


a/k/a Stuffy. '99 I/S Valk Roadsmith Trike

De Pere, WI (Green Bay)


« Reply #5 on: February 23, 2014, 06:30:53 PM »

Create your own "quick drop" kit for those bolts. Then all you have to do is remove two nuts on each side of the fender and the entire bag support comes off. You're going to have a headache putting those bolts back in if you took all of them out at the same time.
Logged

Pages: [1]   Go Up
Send this topic Print
Jump to: