IS POD lights

[mrider]

I have a 99 IS with the pod lights the problem is i believe my switch is bad.......power going in nothing coming out. I bought this bike and had to take a lot of crap wireing off have i missed something? is there a switch out there? can i use a different switch? thanks for the help.

[gordonv]

The original install manual is here,
http://valkyrienorway.com/download.html

Down load it and see if it answers your questions.

You should be able to us any type of proper switch you want.

[sandy]

Original switch is available from Electrical Connections or J&M.

[HayHauler]

There is a relay for those lights too.  Make sure you check it while you are at it.  Mine is under the right side cover, but that is not a requirement.

Hay 
Jimmyt

[fantsybikr]

I have a 99 IS with the pod lights the problem is i believe my switch is bad.......power going in nothing coming out. I bought this bike and had to take a lot of crap wireing off have i missed something? is there a switch out there? can i use a different switch? thanks for the help.

http://www.cruisercustomizing.com/kuryakyn-accessory-switches-for-master-cylinder-reservoir-covers/part/KY-7803?

[Rob A]

The switch comes apart. I had the same problem so I took the switch apart cleaned and lubed it, put it back together and it works like new.
Have a good clean work area if you take it apart, there are some tiny parts in it.

[mrider]

thanks for everyones help!