Ragnar Cut - Before & After.....

[BF]

For those that might be curious as to what the Ragnar Cut will do, or, how it sounds...here's a before and after video. 

Before Ragnar Cut (piggies had been cut and the rear baffles had been drilled)......

Honda Valkyrie - LED turn and tag light modifications	powered by Aeva

And after the Ragnar Cut (rear baffles have been removed)......

Honda Valkyrie - after Ragnar Cut	powered by Aeva

You may not get a full sense of just how big a change that the Ragnar Cut provides listening to the two videos, but it IS a big change.  It is deeper, louder, and more rumbly sounding.  If you want to go Harley Huntin' on the cheap, this mod will do it for you.
 

[art]

sounds good but where did you get the led light on your license tag plate?Art

[BF]

Here......

http://www.customdynamics.com/knight_rider_led_light_bar.htm#Knight_Riderz_LED_License_Plate_Frames

[22Dasher]

I have the rear and front baffles drilled on my Tourer, If I do the Ragnar cut will I need to shim the carbs?

James

[BF]

If I understand it correctly, cut piggies, you won't need to shim.  Cut piggies and rear baffles drilled, you won't need to shim.  Ragnar cut, you won't need to shim. 

Cut piggies & rear baffles drilled  +  drilling the front baffles, yes, you need to shim. 

Ragnar Cut  +  drilling the front baffles, yes, you need to shim. 

I could be wrong, but the way I understand it is.....you don't need to shim unless you've drilled the front set of baffles. 

http://www.valkyrieriders.com/shoptalk/Pipes101.htm

http://luiscajiga.com/Exhaustm.htm

http://luiscajiga.com/Exhaustm2.htm

"Shims, springs and other carb things"......

http://www.rattlebars.com/mtz/shims.html