1998 F6 1500 C OEM windscreen replacement

[f6 white buffalo]

OEM replacement windscreen..

hey guys need some advice..

an being told by my local dealer that the OEM windscreen for my 1998 is unavailable. Cant get them anymore

what is a suitable re[placement that gives similar wind coverage as the monster shield I have now 

I am well protected back there and dont want to make a mistake in picking something I wont like

I have ridden in 50 degree weather with a t shirt on behind that screen and wasn't cold ..

hard to get that with a smaller shield .....anyone know where any OEM shields are hiding ....thanks for your input

[hubcapsc]

Try Clearview for a OEM-style replacement shield...

OEM-style as in: it will fit on the OEM hardware.

not OEM-style as in: made of different stuff, thicker, nicer (I think)...

-Mike

[Joe Hummer]

I looked through your past posts but didn't see which model you had.  If you have the Tourer (has hard saddle and factory windshield like the one shown at this site:  Windscreen), I would go with a Clearview like previously offered.  Top quality, a bit thicker than stock, same mounting.  You just replace the plastic and go. 

If you have a Standard with an aftermarket windshield, then you will have to either replace everything (plastic and mounting frame) with a unit of your preference (such as Memphis Shades) or contact the manufacturer of your shield and ask for a replacement shield for your frame. 

Hope this helps. 

[salty1]

Since you say it's a 98, I assume it's a standard or  tourer. Check these out, they use the OEM hardware.

http://www.ceebaileys.com/honda/valkyriews.html

http://www.clearviewshields.com/motorcycle-windshield/honda/valkyrie-std-tourer-shields/

If you don't want to use the original hardware, check into what Memphis Shields has to offer.

http://www.memphisshades.com/metric-shades

[BF]

F4 Customs used to offer shield replacements for the tourer/standard, but they seem to only offer replacement shields for the Interstate now. 

https://www.f4customs.com/

Salty posted the links to the only other known suppliers of aftermarket replacement shields for the tourers and standards now.....CeeBailey's and ClearView. 

[Bighead]

Hard to beat Ceebailey's 

[Paladin528]

I found a guy not far from me that takes your original windshield and uses it as a template to cut you a new one.  Doesnt handle windshields with compound curves or anything but the end result is pretty good and fits with the OEM hardware.