Valkyrie Riders Cruiser Club
July 09, 2025, 03:27:25 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Pages: [1]   Go Down
Send this topic Print
Author Topic: Help with adapter ? Does anyone one make one for rear that stay up  (Read 1490 times)
Roidfingers
Member
*****
Posts: 729


Tuscaloosa, Alabama


« on: December 14, 2015, 11:58:44 AM »

I bought these large Kuryakyn iso rider footpegs. Website said would fit. Yea they fit alright, but they have about 1/4 inch play between stock clevis. Is there an adapter out there. If not has someone installed these and if so, how ? Thanks

http://www.kuryakyn.com/products/589/iso-pegs
« Last Edit: December 16, 2015, 02:40:59 PM by Roidfingers » Logged
Steel cowboy
Member
*****
Posts: 1284


Moving ahead so life won’t pass me by.

Spring Hill, Fl.


« Reply #1 on: December 14, 2015, 03:32:25 PM »

If you intend to use them for the driver get the hollow adapters due to the spring that goes inside them like the stock ones have.
Logged

2001 black interstate
2003 Jupiter Orange wing
gordonv
Member
*****
Posts: 5762


VRCC # 31419

Richmond BC


« Reply #2 on: December 14, 2015, 05:31:25 PM »

A picture would help.

But if I understand what you are saying, how about a washer to take up the space?
Logged

1999 Black with custom paint IS

Steel cowboy
Member
*****
Posts: 1284


Moving ahead so life won’t pass me by.

Spring Hill, Fl.


« Reply #3 on: December 14, 2015, 05:54:15 PM »

I ordered these from Amazon for my tiger paw driver foot rests
http://www.amazon.com/gp/product/B01448277W?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
Logged

2001 black interstate
2003 Jupiter Orange wing
Jess from VA
Member
*****
Posts: 30445


No VA


« Reply #4 on: December 14, 2015, 06:32:32 PM »

The correct adapters for front driver Kury Iso pegs and all Valks is part number 7946.    

Front OEM Peg Mounts: Honda: All GL1500 Models, '97-'04 Valkyrie Models, '97-'03 1100 A.C.E. Tourer
Front OEM Peg Mounts: Honda: All '97-'04 Valkyrie Models, '97-'03 1100 A.C.E. Tourer
   PR    $26.99
http://www.kuryakyn.com/products/1597/tapered-adapters

Cheaper on Amazon:  http://www.amazon.com/Kuryakyn-7946-Front-Peg-Adapter/dp/B003O6XCF2

I don't know where those knockoffs come from.

Also those pegs should have come with some spring clip washers, which allow movement, but keep them down with no upward force on them.  But they are not going to fill up a quarter inch of space.



« Last Edit: December 14, 2015, 06:40:25 PM by Jess from VA » Logged
h13man
Member
*****
Posts: 1757


To everything there is an exception.

Indiana NW Central Flatlands


« Reply #5 on: December 14, 2015, 11:31:16 PM »

You need to purchase the adapters and pegs separate as  Jess from VA has posted.
Logged
Roidfingers
Member
*****
Posts: 729


Tuscaloosa, Alabama


« Reply #6 on: December 15, 2015, 07:59:09 AM »

Got the 8802 for the rear. Will wait on front pegs to arrive to see if I need to order the front adapters. Thanks for all your help  Smiley
Logged
Jess from VA
Member
*****
Posts: 30445


No VA


« Reply #7 on: December 15, 2015, 10:04:46 AM »

If you end up getting front Iso pegs with male mounts (like we use on Hwy pegs), they are not correct for Valk rider (passenger) positions.... those must be Iso's without ends, and mated with the correct adapters.
« Last Edit: December 16, 2015, 03:35:50 PM by Jess from VA » Logged
Roidfingers
Member
*****
Posts: 729


Tuscaloosa, Alabama


« Reply #8 on: December 16, 2015, 02:43:18 PM »

Fronts came with the correct adapter size. However, went to install the rear pegs and realized they wont stay up and would just rattle around. Took it off and its going back. Anyone know of good after market that will stay up?
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: