Valkyrie Riders Cruiser Club
July 07, 2025, 03:04:55 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Pages: [1]   Go Down
Send this topic Print
Author Topic: fixing a few things  (Read 669 times)
mont
Member
*****
Posts: 12

massachusetts


« on: April 07, 2016, 03:40:33 PM »

  just got done replacing vacuum hoses and intake O-ring .. i might as well replace the fuel tank lines
everything going fine when i pull out the tank vent line ..about 6" long with a T connected to nothing and
3" more .. the question is .. doesn't it go all the way under the bike? and does anything connect to the T
also the driving lights are connected to the headlight bucket ( i don't use them after reading this forum)
was going to use the blue / white for trigger --- i have my Dan Marc switch on the acc. wire ... finding a lot of Mickey Mouse stuff on this bike i am slowly fixing.. Been riding all my life and built hot rods and this bike is quite a machine !!!!!
thank
MONT
Logged
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #1 on: April 07, 2016, 04:00:30 PM »

Yes it should be longer than 6" and end under the bike. Nothing hooks to the "T" it is a vacuum break.
Logged
mont
Member
*****
Posts: 12

massachusetts


« Reply #2 on: April 08, 2016, 05:02:36 AM »

  ok thanks ..that what i thought ..what i should have asked was ...should the T be in that line
or just run a straight  line under the bike ??
thanks
Logged
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #3 on: April 08, 2016, 08:29:14 AM »

  ok thanks ..that what i thought ..what i should have asked was ...should the T be in that line
or just run a straight  line under the bike ??
thanks
Keep the T . If not in a heavy rain you could get blockage and no fuel.
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: