Valkyrie Riders Cruiser Club
June 19, 2025, 02:43:32 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Pages: [1]   Go Down
Print
Author Topic: Extra Part Help!  (Read 2501 times)
postoak
Member
*****
Posts: 90


« on: December 22, 2016, 08:17:40 AM »

This morning, after I replaced the rear turn signal last night. I found a part on the garage floor.  It is a rubber part about the width of the rear fender.  Cross-sectionally, it is u-shaped.  It will slide over the back of the fender at the rear, but there is nothing to keep it in place.

Would somebody check their 2014 and see if there is a piece of black rubber between the top of the rear light and the fender?  In the last photo, I've placed the part on the fender, but it doesn't really look right to me.





« Last Edit: December 22, 2016, 08:28:34 AM by postoak » Logged
_Sheffjs_
Member
*****
Posts: 5613


Jerry & Sherry Sheffer

Sarasota FL


« Reply #1 on: December 22, 2016, 10:16:05 AM »

Did you take the fender off to do this?  I'm sure I remember this piece when I took off my rear fender either it cushioned the fender to the frame or it was on the taillight it self and it cushioned the light to the fender.  But I have had many naps sense that work.   
Logged
postoak
Member
*****
Posts: 90


« Reply #2 on: December 22, 2016, 11:07:11 AM »

Yes, I had to remove the outer fender (fender "B")  and loosen the inner fender (fender "A").
« Last Edit: December 22, 2016, 11:24:08 AM by postoak » Logged
postoak
Member
*****
Posts: 90


« Reply #3 on: December 22, 2016, 11:23:24 AM »

I found it at BikeBandit and Partzilla by looking at taillight parts instead of fender parts.  It's called a "Rear Fender Cover Moul".  It looks like it sits on top of Fender "A" -- has nothing to do with the tail light.
Logged
Pages: [1]   Go Up
Print
Jump to: