Valkyrie Riders Cruiser Club
May 01, 2026, 07:18:31 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > OEM tool kit/set! worth getting one? or are there better aftermarket sets??
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: OEM tool kit/set! worth getting one? or are there better aftermarket sets??  (Read 3504 times)
daytona
Member
*****
Posts: 209


Port Orange, FL
« on: August 06, 2009, 03:30:37 PM »
Went looking for the set that should be in the left hard bag, nothing in the holder! Is there a better kit for A 99 Interstate? Or is the OEM best? Any suggestions on where to get it, H line etc. Thanks   
Logged
Just started!
Capt. Morgan
Member
*****
Posts: 145


Midlothian, IL , Portage, IN


WWW
« Reply #1 on: August 06, 2009, 03:58:53 PM »
The only tool in the whole kit you need is the one for adjusting the shocks. Otherwise for the others, I would just go to Sears or somewhere and pick up the rest, and you will have better quality tools.
Logged

Capt. Morgan
1999 Valkyrie Interstste
The "Fast Black Type"
daytona
Member
*****
Posts: 209


Port Orange, FL
« Reply #2 on: August 06, 2009, 04:16:01 PM »
Thanks for the suggestion cooldude I've searched for a list of sizes, as far as wrenches sockets etc, can't find anything. A set of metric gear wrenches & sockets W/ratchet, screw drivers, plug socket! anything special found to be a must? 
Logged
Just started!
Valker
Member
*****
Posts: 3064


Wahoo!!!!

Texas Panhandle
« Reply #3 on: August 06, 2009, 04:26:46 PM »
Click here: http://cruztools.com/toolkits%202007.html and scroll down to "Metric". Good quality.
Logged
I ride a motorcycle because nothing transports me as quickly from where I am to who I am.
R J
Member
*****
Posts: 13380


DS-0009 ...... # 173

Des Moines, IA
« Reply #4 on: August 06, 2009, 04:52:06 PM »
Quote from: daytona on August 06, 2009, 03:30:37 PM
Went looking for the set that should be in the left hard bag, nothing in the holder! Is there a better kit for A 99 Interstate? Or is the OEM best? Any suggestions on where to get it, H line etc. Thanks   


I wouldn't worry too much about it.

MGM has 242,000+ miles and the wrench set has never been out of it's hiding place.   That is from Aug of 97 to date.......
Logged
44 Harley ServiCar
 



 

Bone
Member
*****
Posts: 1596
« Reply #5 on: August 06, 2009, 05:26:38 PM »
HDL has the set that is in my 98 Tourer.

02 TOOL SET
89010-MZ0-000  001 $67.56

http://www.hdlparts.com/fiche_section_detail.asp?section=148835&category=MOTORCYCLES&make=HONDA&year=1998&fveh=3477
Logged
Grandpot
Member
*****
Posts: 630


Rolling Thunder South Carolina Chapter 1

Fort Mill, South Carolina
« Reply #6 on: August 06, 2009, 05:42:12 PM »
If you make up a kit on your own, be sure to get a spark plug socket and try it out to make sure it fits down into the hole and over the plug.  Angry
Logged
crazy2 Experience is recognizing the same mistake every time you make it.crazy2
hubcapsc
Member
*****
Posts: 16834


upstate

South Carolina
« Reply #7 on: August 06, 2009, 05:43:28 PM »
I like the OEM toolkit. When I was desmogging, I had to cut down an allen-head wrench
to fit up into the tube on the bottom of the engine... later I realized that there was an
allen wrench in the OEM kit that fit up in there great...

-Mike
Logged
https://sites.google.com/a/g.clemson.edu/confederate-memorial-day-at-clemson/
alan
Guest
« Reply #8 on: August 07, 2009, 09:15:12 AM »
I have an 00 I/S and from the Owner Manual here is the list of tools in the kit:

10 X 12 mm open end wrench
14 X 17 mm     "     "      "
8mm               "     "      "
5mm               "     "      "
spark plug wrench
standard/ Phillips screwdriver
screwdriver handle
pliers
pin spanner
tool bag

All of these are easily found in the nearby pawn shop or Habitat/Restore. Put all this in a small plastic box with some other tools/odds/ends/tire plug kit and you have a neat kit for rescuing stranded cyclists. I carry a AAA card and a credit card for my repairs.
Logged
hueco
Member
*****
Posts: 348

WACO,TEXAS
« Reply #9 on: August 07, 2009, 09:30:55 PM »
I was lucky enough to get the complete tool bag (with tools) when I bought my "98". One of these days that stock tool kit will be worth something with the bike. But, I am a tradtionlist. If the original kit comes with the bike that is icing on the cake. Wink
Good job, alan. cooldude
Quote from: alan on August 07, 2009, 09:15:12 AM
I have an 00 I/S and from the Owner Manual here is the list of tools in the kit:

10 X 12 mm open end wrench
14 X 17 mm     "     "      "
8mm               "     "      "
5mm               "     "      "
spark plug wrench
standard/ Phillips screwdriver
screwdriver handle
pliers
pin spanner
tool bag

All of these are easily found in the nearby pawn shop or Habitat/Restore. Put all this in a small plastic box with some other tools/odds/ends/tire plug kit and you have a neat kit for rescuing stranded cyclists. I carry a AAA card and a credit card for my repairs.
Logged
daytona
Member
*****
Posts: 209


Port Orange, FL
« Reply #10 on: August 08, 2009, 02:56:51 PM »
Thanks to all for the info! I ordered the OEM kit for the 99 I.S. These D.Line folks do a great job with parts & prices.  cooldude
Logged
Just started!
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.21 | SMF © 2015, Simple Machines MySQL | PHP | XHTML | CSS