Digital Carb Sync

[dpcarson]

I am good with this Tom.  It works.  Chasing perfection is a useless task chasing a moving target.  I will take these numbers any day.  Now waiting for my D- screw socket to show up so I can get those little buggers adjusted properly.  It still sounds like I am just a little lean

[dreamaker]

As I was waiting for the ground to freeze, so I can bring the bike from the back garage to the front garage. Something occurred to me! If I have all six hoses connected to the vac. ports, how will I keep gas flowing from the gas tank?  If I use a tee, will it effect the accuracy of the sync?  Maybe not at all! Have to wait and see.

[dpcarson]

I did it both with and without the tee.  the difference was very very small.  I am a first timer, but my thought was, it is going to be running with the vacuum line attached to the petcock, so shouldn't I sync it with the vacuum line attached?

[Hook#3287]

As I was waiting for the ground to freeze, so I can bring the bike from the back garage to the front garage. Something occurred to me! If I have all six hoses connected to the vac. ports, how will I keep gas flowing from the gas tank?  If I use a tee, will it effect the accuracy of the sync?  Maybe not at all! Have to wait and see.

You start the bike and use a surgical hose clamp to clamp the hose and then remove it from the back of #6.  It should hold the vacuum.

[BonS]

Hook is right. I pull the tube off of #6, suck on it, and clamp it. Hemostats are perfect. All I had was a small vice-grip and it worked fine.

[BonS]

If you're interested in a fully assembled Digi Sync please check the Classifieds.
http://www.valkyrieforum.com/bbs/index.php/topic,76607.0.html

[gordorad]

 

[dreamaker]

Some times my head is up my a$$, I have a Mighty Vac, so what is my problem. Some times I just don't think.  Thank You all for your help.

[tz89]

Here's a picture of my new black label boards. A little more expensive for me, but that's ok. They are lead-free, so they can be exported anywhere. Some minor improvements on the graphics. But most important - fast and reliable supply.

[Pappy!]

TZ - Pretty amazing job you have done on this! Thanks so much for your efforts and for offering it to the community!

[tz89]

You are welcome. It's still fun.

[tz89]

Verical is selling the sensors for $10! That really helps keep the cost down.

https://www.verical.com/pd/freescale-pressure-sensor-MPXV6115VC6U-253910

[gsxr1300x]

tz, i sent you a PM. Interested in building one of your digital carb sync tools.

[The emperor has no clothes]

tz, i sent you a PM. Interested in building one of your digital carb sync tools.

Or you could buy one. DigiSync was developed from this idea.

[tz89]

tz, i sent you a PM. Interested in building one of your digital carb sync tools.

Got it. I do have some boards left. Otherwise, all the info and parts list, including the layouts for do-it-yourself board makers, is free on Github. Just search for digital carb sync.