VRCC Members motorcycles, post your picture here.

[shortleg]

  here I am with a few others.
         Shortleg[Dave]
     

[Scott in Ok]

Surely SOMEONE has NEW pics of their ride?  Besides, we can't let Raymond's ride to work thread overtake this very important thread!

Blackduck's bike, which used to be mine.

[Bagger John - #3785]

That Givi trunk setup...does it mount to the stock luggage rack?

[Scott in Ok]

That Givi trunk setup...does it mount to the stock luggage rack?

In that picture, yes.  I used it that way for 3-4 years but the stock luggage rack eventually cracked.  I then went with a set of I/S fender rails, and trunk mounting rails.  I fabricated a plate to bolt to the I/S trunk mounting rails, and attached the Givi plate to it.  I got the rails for a very good price(free i think) from my good friend Highbinder, or it would have been rather expensive to do that.

-Scott

[Al in AK]

I also used the Interstate rack and rails ( ebay ) for this setup. Alluminum plate bolted to rack. Old tour pak made for Harley years ago. I actually had to save it, new paint and had the rails re-chromed. Found the backrest at a second hand store by accident, $20.00.

[Moonshine]

Mine and BIRD'S

[Moonshine]

GOO-GOO Magoo's Ride

[Big IV]

[KingValk]

My new Valk. Rode it 1100 miles home the first weekend!

[shortleg]

[franco6]

my best side

[alph]

growing up my mother was deathly afraid of motorcycles, when i got my first Yamaha at age 30 she was so pissed at me she didn't talk to me for over a month.  last year i sent her a christmass card with pictures of me and my Valk.  believe it or not, she told me that it was a beautiful motorcycle!!  i guese she just didn't like Yamaha's!!

oh, check out the shield i put over my oil filter.  had to hide that ugly thing somehow!!

[¿spoom]

and from earlier days:

[Lil D]

[ssober]

Here is a pic of mine the day I bought it.  when my new batwing radio fairing comes back from the painter I will post pics of the final answer

[Werner]

My Valk´s.
To first my Valk at my hometown Hankensbüttel, Germany




And now my Valk in Anniston, AL

[GREENDRAGON]

http://i232.photobucket.com/albums/ee201/6packvalk/HorsetoothResevouir9-2007003.jpg
GREENDRAGON, Ft. Collins Co.

[Big IV]

Nice bike Green Dragon

[QOTFU]

[stormrider]

01 I/S bought in Aug. 06 with 11k miles, at Barber's in May 09 with 34k miles.





At Barber's at the award's podium in the background. Honda Classic and the Honda Superbike Classic

[TwoDogs]

[Hoser]

Finally found a couple pics where I don't look like a moron.  Well, at least my dog don't think so!   Hoser
Hay, if I got two valks does that make me bisixual?

[Chillerman]

[Scott in Ok]

Way back in the day... (2004)



-Scott

[Scott in Ok]

Rumblebee's Bumblebee

[grey ghost]

           

[BudMan]

My first attempt at loading a photo, plz bear with me.  


The Dark Lady.

[Cliff]

My lady and our ride.

[B]

My son's 73



Shadow from the past



The 99 Valk I usually ride, but ....



I Got Stuck riding this when I btoke both bones in my lower leg

[Tundra]

[9Ball]

like something out of Caddyshack....

[grey ghost]

  grey ghost and spooky on 1500 classic                                                             

[NCGhostrider]

On one of the trips to Colorado... what a nice ride!!!  Wish I were there now!



And below, the original black and chrome, which I still miss.. I think it was better, not sure why!  This was several years ago, before the divorce and a greedy ex wife...etc. etc. etc....

[judd]

Hey RJ, 


love those servicars! 
i've been looking for a good deal on a rear axle from one to do a Honda CB750 trike, but they're way too costly now, usually $1700-$2000 fo a decent one!  so i picked up a chain to shaft gear box from a yamaha & i'm goin' to adapt that to a CB750 tranny & go shaft drive using a chevy S10 rear end. but that's a ways off.
tomorrow i'm picking up a '57 chevy rear end to convert Bettie (picture below) to an open drive shaft (she's got the enclosed, original  "torque tube"). i wanna replace the 3 speed with a T5, better milage & drop the rpms on the old stovebolt at highway speed.

too many projects? YEP!

Yo Bigdan, Nice ride, you gonna love that T5 .......I did my Ponch, best mod to date.

80's Camaro T5 with S10  tailshaft to allow shifter to clear bench seat, Pro 5.0 shifter and Hurst stick


Oh ya and in keeping with the thread

[DeathWishBikerDude]

[hubcapsc]

You need a new handle, or you need to somehow become much more scary looking 

-Mike

[Smokinjoe-VRCCDS#0005]

You need a new handle, or you need to somehow become much more scary looking  

-Mike

I got to agree Mike with a handle like that I'd have second thoughts just ridin' to the mailbox  
I like that color combo on the Valk Death Wish 

[bludragon]

Bludragon
Picture taken at the Badlands National Park, SD, on my way back home to Montreal ( sigh!!) from Inzane IX. My 2001 blue and white standard has 120, 300 kms ( 72000 miles)

[Gear Jammer]

[KY,Dave (AKA Misunderstood)]

On the Blue Ridge Parkway

With my Uncle taking a break on our way up Cadillac Mtn in Acadia National Park Maine

And another in Acadia National Park