Valkyrie Riders Cruiser Club
June 28, 2025, 06:04:16 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
VRCC Calendar Ad
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Hinge on an IS trunk
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Hinge on an IS trunk  (Read 951 times)
NighthawkVTX
Member
*****
Posts: 221


Gainesville, Fl
« on: March 28, 2018, 08:25:43 AM »
The other day I noticed that 2 scews rom my trunk hinge had disappeared.
No big deal I thought.
I pulled the remaining screw and founf it was a m6.
Well I tried to screw in two new screws and found they dont fit... by alot.
Does anyone one know the screws that will fit?
Logged
If at first you don't succeed, then perhaps skydiving isn't for you
Chrisj CMA
Member
*****
Posts: 14769


Crestview (Panhandle) Florida
« Reply #1 on: March 28, 2018, 08:39:07 AM »
Take the one good one to ACE hardware and match it up
Logged
Paladin528
Member
*****
Posts: 722


Greater Toronto Area Ontario Canada


WWW
« Reply #2 on: March 28, 2018, 10:32:27 AM »
it is likely one of the following  There is one short one and 2 long ones per hinge.

SCREW, PAN (6X8)
93500-06008-0G

SCREW, PAN (6X20)
93500-06020-0G
Logged
NighthawkVTX
Member
*****
Posts: 221


Gainesville, Fl
« Reply #3 on: March 29, 2018, 10:43:35 AM »
Well I unscrewed a screw from the opposite hinge.
The problem is now I cant get the screw to  thread. Im guessing there must be a nut on the other side of the wall.
Im thinking of taking the speaker out and looking at the inside.
Uhhhh anyone knowhow to temove the speakers?
Logged
If at first you don't succeed, then perhaps skydiving isn't for you
Hook#3287
Member
*****
Posts: 6433


Brimfield, Ma
« Reply #4 on: March 29, 2018, 11:11:08 AM »
Quote from: NighthawkVTX on March 29, 2018, 10:43:35 AM
Well I unscrewed a screw from the opposite hinge.
The problem is now I cant get the screw to  thread. Im guessing there must be a nut on the other side of the wall.
Im thinking of taking the speaker out and looking at the inside.
Uhhhh anyone knowhow to temove the speakers?
Yeah, each hinge has 2 nuts under the speakers.

NUT, FLANGE (6MM)
94050-06070

they go to

SCREW, PAN (6X20)
93500-06020-0G

You'll need these also

COLLAR, RADIATOR MOUNTING
19052-KV0-000
« Last Edit: March 29, 2018, 11:14:21 AM by Hook#3287 » Logged
NighthawkVTX
Member
*****
Posts: 221


Gainesville, Fl
« Reply #5 on: March 29, 2018, 11:26:49 AM »
Ahhhhhh they makes sense. Now just to remove the speakers without breaking anything
Logged
If at first you don't succeed, then perhaps skydiving isn't for you
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS