gastay
|
 |
« on: December 04, 2018, 06:38:22 AM » |
|
Looking for a new cover to keep the dust off the bike when stored in the garage. Any help on mfg and size needed would be appreciated. I currently have a fitted queen sheet on it but it doesn't cover the windshield or front forks. I don't know if a king size sheet would do the trick but I kinda doubt it.
|
|
|
Logged
|
|
|
|
pancho
|
 |
« Reply #1 on: December 04, 2018, 07:19:01 AM » |
|
I have used a king by hooking one corner under the front fender,, it covers most of the bike but still not all and there is no trunk on mine.
|
|
|
Logged
|
The most expensive things you will purchase, are those things you would not have needed if you had listened and obeyed.
|
|
|
wingrider02
|
 |
« Reply #2 on: December 04, 2018, 07:53:32 AM » |
|
I picked up two Nelson-Rigg MC-904-05-XX large deluxe covers from Amazon a few years back for our IS’s that we keep in TN. Covers up everything nicely. Fairly inexpensive...
|
|
|
Logged
|
|
|
|
bunson
|
 |
« Reply #3 on: December 04, 2018, 10:09:38 AM » |
|
Bought this one: Formosa Covers Deluxe All Season Motorcycle cover (XXL) Black. Fits up to 108" length Large cruiser, Tourer, Chopper, from Amazon for $33. Well made and fits well.
|
|
|
Logged
|
|
|
|
98valk
|
 |
« Reply #4 on: December 04, 2018, 10:48:00 AM » |
|
|
|
|
Logged
|
1998 Std/Tourer, 2007 DR200SE, 1981 CB900C 10speed 1973 Duster 340 4-speed rare A/C, 2001 F250 4x4 7.3L, 6sp
"Our Constitution was made only for a Moral and Religious people. It is wholly inadequate to the goverment of any other." John Adams 10/11/1798
|
|
|
Jess from VA
|
 |
« Reply #5 on: December 04, 2018, 11:27:18 AM » |
|
An old king waterbed sheet (top and bottom sewn together) does nicely for a dust cover. (The thing is in satin, which 32 years ago I thought would be fun with a new wife. It turned out to be cursed slippery and you could fall right out of bed if you weren't careful.  ) I would not get a bike cover with elastic bottom for a garage dust cover.... esp on interstates, the bastids are a PITA to get on and off.
|
|
« Last Edit: December 04, 2018, 11:28:51 AM by Jess from VA »
|
Logged
|
|
|
|
gordonv
Member
    
Posts: 5760
VRCC # 31419
Richmond BC
|
 |
« Reply #6 on: December 04, 2018, 04:28:14 PM » |
|
I bought mine back in 2010, one of those cheap ones from China, 1 cent, and $19.99 shipping. It was a nylon cover, I figure more of a dust cover than an outdoor one, but since my bike is stored in a parkade, it was all I needed.
Turned out after a little pulling and tugging, it would cover from wheel to wheel. I've an IS. XXL.
I'm seeing them on ebay again, $20 CAD free shipping.
Note: Just remember, not to put it onto a bike with hot pipes, or it will melt. Expensive ones have heat resistant panels for the bottom.
|
|
« Last Edit: December 05, 2018, 05:16:27 PM by gordonv »
|
Logged
|
1999 Black with custom paint IS  
|
|
|
msb
|
 |
« Reply #7 on: December 04, 2018, 04:50:03 PM » |
|
I have a good cover large enough to cover my IS from the front tire to the back fender, though the only time it gets used is on long multi day/week trips to keep the bike dry and low profile when parked outside overnight. When stored in the garage for the two or three months of Winter we get here, a couple coats of good wax and some periodic loving attention wiith a soft cloth keeps her clean ... and keeps her from getting lonely as well if I'm not tinkering on her. 
|
|
|
Logged
|
Mike
'99 Red & Black IS
|
|
|
luna negra
|
 |
« Reply #8 on: December 04, 2018, 05:03:28 PM » |
|
|
|
|
Logged
|
|
|
|
old2soon
|
 |
« Reply #9 on: December 04, 2018, 05:22:32 PM » |
|
Can't tell ya the name of it but it is XXL in size came from wally wurld and was less than 30 bucks-5 years ago. RIDE SAFE.
|
|
|
Logged
|
Today is the tommorow you worried about yesterday. If at first you don't succeed screw it-save it for nite check. 1964 1968 U S Navy. Two cruises off Nam. VRCCDS0240 2012 GL1800 Gold Wing Motor Trike conversion
|
|
|
zero200
|
 |
« Reply #10 on: December 05, 2018, 06:15:27 AM » |
|
I have this one in XXL. It’s about 100 bucks and it’s quite heavy duty. Covers everything but a little piece of the front wheel. Good if you ever have to park it outside. Also won’t melt if you’ve been riding it all day and put the cover over it while it’s hot. Dowco Guardian 50005-02 WeatherAll Plus Indoor/Outdoor Waterproof Motorcycle Cover: Black, XX-Large https://www.amazon.com/dp/B000GRML6S/ref=cm_sw_r_cp_api_0F-bCbTCBZYG8
|
|
|
Logged
|
|
|
|
gastay
|
 |
« Reply #11 on: December 05, 2018, 06:23:19 AM » |
|
Thanks for the info fellas.
|
|
|
Logged
|
|
|
|
Bagger John - #3785
|
 |
« Reply #12 on: December 05, 2018, 06:50:21 AM » |
|
Way back when, Dowco made a couple of covers that would work nicely with our Valkyries. These were made of heavy Scotchguarded cloth and had protector panels sewn into the areas which contact the bike's windshield. One was for a Tourer-style setup; it had zip-out pockets for windshield and sissy bar. This could also be used with a Standard.
The other was for a full-dress (I/S) model. I have two of the latter and one of the former; depending on how I have my Tourer configured I may take the big cover on trips or just use the smaller one.
I haven't found any others available of similar quality.
|
|
« Last Edit: December 06, 2018, 11:50:15 AM by Bagger John - #3785 »
|
Logged
|
|
|
|
MnM Valk 97
|
 |
« Reply #13 on: December 05, 2018, 05:51:43 PM » |
|
|
|
|
Logged
|
1997 GL1500CT 2015 GL1800C
|
|
|
Jess from VA
|
 |
« Reply #14 on: December 05, 2018, 06:53:08 PM » |
|
Depending on weather fluctuations, waterproof can be not so good. One has to assume this is not a breathable waterproof, like Gortex, for 20 bux. A bike that spends months indoors through a long winter in an unheated bldg under a non breathing cover can get a lot of repetitive condensation, and corrosion. Corrosion can be exterior and interior of the bike.
The tank should be full to top in any event.
|
|
« Last Edit: December 05, 2018, 06:54:53 PM by Jess from VA »
|
Logged
|
|
|
|
|