Valkyrie Riders Cruiser Club
June 25, 2025, 06:45:00 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > General > 1500 Tech Board > Dan Marc questions
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: Dan Marc questions  (Read 744 times)
HBFL
Member
*****
Posts: 48
« on: July 08, 2019, 01:40:57 PM »
The DM .250 is on its way.

Is 5/16 ID fuel line ok on the petcock line and the two carb feed lines?

The carb lines measure out around 3/8 ID.

Thanks in advance!
Logged
The emperor has no clothes
Member
*****
Posts: 29945
« Reply #1 on: July 08, 2019, 02:08:53 PM »
That's what I used.  cooldude along with a brass T coming off the Dan Marc.
Logged
Leathel
Member
*****
Posts: 877


New Zealand
« Reply #2 on: July 08, 2019, 02:59:34 PM »
I went T on the AFC valve to the carbs and 3/8 hose to the tank which is a loose fit on the pingel, I use a hose clamp that is easy to access with a long screw driver, makes it easy to get the hose on the tank Smiley
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS