Valkyrie Riders Cruiser Club
June 17, 2025, 08:41:18 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Valkyrie Riders Cruiser Club > General > 1800 Tech Board > Trailer Hitch for the 14-15 Valk
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Trailer Hitch for the 14-15 Valk  (Read 3031 times)
Phlee
Member
*****
Posts: 4



WWW
« on: December 04, 2019, 10:21:48 AM »
Has anyone found a trailer hitch for the 2014-2015 Valkyries?

If so, please share pics and THE LINK! Cool
Logged
2014 Valkyrie 1800
Barnstormer
Member
*****
Posts: 92
« Reply #1 on: December 06, 2019, 02:01:01 PM »
I made one that works well.   There are no factory built ones made as far as I know.  Two pieces of “C” chanel iron two pieces of 1 inch straight iron welded to a cut off piece of an old receiver hitch connected to the frame with kuryakyn 1 inch foot peg mounts.  Wording lights also a problem.  No plug and play wiring kits.  Finally got a Hopkins 46365 powered converter and I now have all my lights working properly.  The “C” Chanel is aprox 1 3/4 the metal going up to the frame ia 1 inch wide 1/4 thick Got the metal stock at Home Depot.  The receiver part I it off an old automobile trailer hitch.  There are no plug and play lighting setups so I attached the converter to the wired in the harness under the seat.
« Last Edit: June 24, 2020, 12:22:17 PM by Barnstormer » Logged
Hot Rod
Member
*****
Posts: 49


East Tennessee
« Reply #2 on: December 07, 2019, 07:30:25 AM »
https://www.classicind.com.au/     Part # TH63
« Last Edit: December 07, 2019, 07:33:12 AM by Hot Rod » Logged
“The bravest are surely those who have the clearest vision of what is before them, glory and danger alike, and yet notwithstanding, go out to meet it.” Thucydides 460 - 455 BC
Pages: [1]   Go Up
Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS