Valkyrie Riders Cruiser Club
July 16, 2025, 12:42:35 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
MarkT Exhaust
Pages: [1]   Go Down
Send this topic Print
Author Topic: Switching Standard throttle assembly to I/S throttle assembly  (Read 995 times)
Hook#3287
Member
*****
Posts: 6451


Brimfield, Ma


« on: January 02, 2021, 11:00:47 AM »

Any one know if this is just a swap or are new cables needed?

Also wondering if the electrical plug is compatible?
Logged
baldo
Member
*****
Posts: 6960


Youbetcha

Cape Cod, MA


« Reply #1 on: January 02, 2021, 11:20:29 AM »

Any one know if this is just a swap or are new cables needed?

Also wondering if the electrical plug is compatible?


Cables are the same as far as I know

Attic Rat just changed my right switch housing out and didn't say anything about replacing the cables. I went with the I/S assembly because the cables route out the bottom of the housing. This provides the extra cable length needed if you want to go with taller risers.

I believe the electrics are the same.
Logged

Hook#3287
Member
*****
Posts: 6451


Brimfield, Ma


« Reply #2 on: January 02, 2021, 11:27:31 AM »

Any one know if this is just a swap or are new cables needed?

Also wondering if the electrical plug is compatible?


Cables are the same as far as I know

Attic Rat just changed my right switch housing out and didn't say anything about replacing the cables. I went with the I/S assembly because the cables route out the bottom of the housing. This provides the extra cable length needed if you want to go with taller risers.

I believe the electrics are the same.

Hey Bob, thanks for the info.

How you doing?

I need to move the position of where the cables come out from the assembly cause they interfere with the mirror stem, making the mirror useless and the brake lever somewhat to high.

I don't care about the mirror, except the blinker is in it, so it stays.

I can see the cables are different at the ends that attach to the assembly, cause the angle on them is different.  Just wondering if compatible.

What did Attic Rat do to your bike?
Logged
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #3 on: January 02, 2021, 11:38:17 AM »

Any one know if this is just a swap or are new cables needed?

Also wondering if the electrical plug is compatible?

Bill, it will be no problem. I have used Standard cables on my I/S before.
Logged
Hook#3287
Member
*****
Posts: 6451


Brimfield, Ma


« Reply #4 on: January 02, 2021, 11:41:52 AM »

Any one know if this is just a swap or are new cables needed?

Also wondering if the electrical plug is compatible?

Bill, it will be no problem. I have used Standard cables on my I/S before.

Thanks Rob,  I kinda thought that but figured I'd ask here.

You tired of being retarded  retired yet?
Logged
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #5 on: January 02, 2021, 11:43:25 AM »

Any one know if this is just a swap or are new cables needed?

Also wondering if the electrical plug is compatible?

Bill, it will be no problem. I have used Standard cables on my I/S before.

Thanks Rob,  I kinda thought that but figured I'd ask here.

You tired of being retarded  retired yet?
Grin nope, liking it pretty well.  cooldude
Logged
Hook#3287
Member
*****
Posts: 6451


Brimfield, Ma


« Reply #6 on: January 02, 2021, 11:45:56 AM »

Good for you. Smiley

Happy New Year Brother.

Say "Hey" to Brenda for me
Logged
The emperor has no clothes
Member
*****
Posts: 29945


« Reply #7 on: January 02, 2021, 11:56:50 AM »

Good for you. Smiley

Happy New Year Brother.

Say "Hey" to Brenda for me
You too. Thanks  cooldude
Logged
Pages: [1]   Go Up
Send this topic Print
Jump to: