Valkyrie Riders Cruiser Club
June 24, 2025, 01:13:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Ultimate Seats Link VRCC Store
Homepage : Photostash : JustPics : Shoptalk : Old Tech Archive : Classifieds : Contact Staff
News: If you're new to this message board, read THIS!
 
Inzane 17
Valkyrie Riders Cruiser Club > Chapter Boards > Florida Chapter > WANTED TO BUY - brake - clutch master cylinder controls
Pages: [1]   Go Down
« previous next »
Send this topic Print
Author Topic: WANTED TO BUY - brake - clutch master cylinder controls  (Read 2059 times)
thewoodman
Member
*****
Posts: 346


Bradenton, FL
« on: August 19, 2021, 11:47:21 AM »
Put this in the classifieds earlier, so here goes:
   
I'm looking for a brake - clutch master cylinder control set for my '97 Tourer. It started with a small seeping leak from the site glass on the clutch side and went sideways from there. Try to find 17mm site glass. Bought a pair of aftermarket controls and although the brake works fine, the clutch does not function with the correct stroke-pull action as stock. It you have a set, hit me up.

woodman
Logged


The first step in getting somewhere is deciding that you are not going to stay where you are.

TheWoodMan
Lucky Duck
Member
*****
Posts: 89

Inverness, FL
« Reply #1 on: August 19, 2021, 01:58:34 PM »
I've seen guys replace the sight glass with a dime. You loose the function of the sight glass but it looks kinda cool. I don't know how they held the dime in place, maybe JB Weld or something similar. This is assuming that the only problem is a sight glass that leaks.
Logged
thewoodman
Member
*****
Posts: 346


Bradenton, FL
« Reply #2 on: August 20, 2021, 07:21:35 AM »
I'll have to give that a look since I now have a variety of stuff to play with. Thanks for the idea.
Logged


The first step in getting somewhere is deciding that you are not going to stay where you are.

TheWoodMan
Valkorado
Member
*****
Posts: 10491


VRCC DS 0242

Gunnison, Colorado (7,703') Here there be twisties.
« Reply #3 on: August 23, 2021, 04:21:52 AM »
https://www.ebay.com/itm/1Set-17mm-Brake-Master-Cylinder-Reservoir-Sight-Glass-Motorcycle-Dirt-Bike-Gaske-/193703706603?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Logged
Have you ever noticed when you're feeling really good,
there's always a pigeon that'll come sh!t on your hood?
- John Prine

97 Tourer "Silver Bullet"
01 Interstate "Ruby"
thewoodman
Member
*****
Posts: 346


Bradenton, FL
« Reply #4 on: August 24, 2021, 11:39:52 AM »
Thanx for that. I ordered two sets but their arrival time isn't until November sometime. It's all good and
 just a thing. I found a 2001 Goldwing clutch master cylinder on Pinwall yesterday and although the brake line bung is 90 degrees off, it's worth a shot for $13 bucks.
Logged


The first step in getting somewhere is deciding that you are not going to stay where you are.

TheWoodMan
agrady1995
Member
*****
Posts: 124
« Reply #5 on: September 14, 2021, 06:11:22 AM »
Rebuilt mine 2x now. If you want to swap I can mail you out a rebuilt set. Let me know.

Kilroy
Logged
Pages: [1]   Go Up
Send this topic Print
« previous next »
Jump to:  

Theme by Crip Powered by SMF 1.1.20 | SMF © 2013, Simple Machines MySQL | PHP | XHTML | CSS