Valkyrie Riders Cruiser Club
July 13, 2025, 12:57:26 PM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Homepage
:
Photostash
:
JustPics
:
Shoptalk
:
Old Tech Archive
:
Classifieds
:
Contact Staff
News
: If you're new to this message board,
read THIS!
Home
Help
Search
Login
Register
Valkyrie Riders Cruiser Club
>
General
>
1500 Tech Board
>
Steering Stem
Pages: [
1
]
Go Down
« previous
next »
Author
Topic: Steering Stem (Read 1280 times)
RLD
Member
Posts: 318
'99 I/S Red/Black
Eden Prairie, MN
Steering Stem
«
on:
March 19, 2010, 08:14:36 AM »
Just wondering, on my last I/S, it seems to me there was some tension in the steering stem. In other words, when you let go of the steering, in any position, it would stay there or slowly fall to the side (on a stand, off the ground). My new "to me" I/S dropss hard and fast but I can't detect any play or notching in the bearing. Should I re-torque and see if this changes or is this one "normal"? It's a 99 with 23K miles. Thanks guys for your opinions!!
Logged
Dress for the slide, not the ride. ATGATT
VRCC #2505
Ricky-D
Member
Posts: 5031
South Carolina midlands
Leave it alone!
«
Reply #1 on:
March 19, 2010, 10:34:10 AM »
Trying to relate your feelings about operation of one bike to another and then on top of that start to make adjustments based on your feelings is not recommended.
If you feel no obvious problems with the front end, why would you want to make changes.
There's a whole lot more to the dynamic than just the stem bearings.
***
Logged
2000_Valkyrie_Interstate
RLD
Member
Posts: 318
'99 I/S Red/Black
Eden Prairie, MN
Re: Steering Stem
«
Reply #2 on:
March 19, 2010, 11:02:22 AM »
I agree with "if it isn't broke, don't fix it", but this one is a bit more of a handful in parking lot maneuvers. Seems to "drop off" left or right really easily and quickly. I've really got to watch it when executing a 180. Just thought this could be the culprit. Everything else works fine.
Logged
Dress for the slide, not the ride. ATGATT
VRCC #2505
roadmap
Member
Posts: 85
Re: Steering Stem
«
Reply #3 on:
March 20, 2010, 05:31:03 AM »
i don't own a torque wrench. i do all my adjustments by feel. i always done it that way.
lets see, with your tire off the ground your wheel sould have a slight drag on it. wehat i mean is if it falls to one side like bamm! it is to loose. it a job to adjust but it needs to be tighten. mine has a steady flow or side to side movement with a slight drag. it easy to feel yourself overtighten the stearing then just loosen till it flows side to side not drop freely or stick midway. the weight of the tire and rim will make it fall quicker so adjust it a little to the weight.
with the age of the bike not just the miles loosen the stearing head nut enough to drop a little to check the lower bearing if bad they will fall all out. probably not bad but so you can relube the bearing.
1997 145,000 replaced bearing once when mine went bad stearing got a little rough and when i loosened the stearing all the balls went everywhere. it some thing you can do by feel just repeat the tightening till it ........
Logged
Pages: [
1
]
Go Up
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Chapter Boards
-----------------------------
=> Texas Chapter
=> Kansas Chapter
=> Iowa Chapter
=> Florida Chapter
=> SoCal Chapter
=> Northwest Valkyrie Riders
=> British Columbia
=> New England Chapter
=> Arizona Chapter
=> South Dakota Chapter
-----------------------------
General
-----------------------------
=> General Board
=> InZane XXV
=> 1500 Tech Board
=> 1800 Tech Board
=> VRCC Members Memorial Board
=> InZanes past
=> old classifieds