Darksiders - need advice

[BamaDrifter64]

Got my MC tire off today and need to make a decision whether to replace with another MC tire or a DS tire.  I have both - the DS is a GY ATT 205/60R/16.  Nutcage mod has already been done to the bike.  However, my concerns rest in the fact that my I/S has been lowered a half inch front and rear.  I have Progressive 440s in the rear, but they're a half inch shorter than stock, so I'm concerned about fender rubbing with the DS.  Think that might be a problem?

Dave

[Shades]

You shoudl be just fine. I jack the rearend up over the exhaust to put the rear axle back in and it don't rub then. so you should be fine. Ride Safe out there. Shades

[asfltdncr]

The fact that some darksiders run 65's, I would think the 60 would work with your situation.

[DFragn]

I run the GYTT and Progressive 12.5's and progressive fork springs with a lower profile front tire 150/70-17 and no problems.

[Crazyhorse]

Ran a 205/55-16 CT with 12.5" Progressive shocks worked great. May go back to a CT on one of the Valks next time.

Mac

[Dave Weaver]

You'll die a flaming death, put your eye out, and then something bad will happen to you if you put a car tire on a Valk.  Send that TT to me for proper disposal and I'll send you a nearly new Dunlop E3 to replace it with. 

[BamaDrifter64]

You'll die a flaming death, put your eye out, and then something bad will happen to you if you put a car tire on a Valk.  Send that TT to me for proper disposal and I'll send you a nearly new Dunlop E3 to replace it with. 

I think I like my chances more with the flaming death TT than I would with a Dunflop....

But I do have a brand new Avon that I might be looking to get rid of at a later date....

Dave