I/S Pods on Tourer

[cef2lion]

I have all the parts to add the I/S Pods. I have question for those that might have done this. There is a write-up in the shop section. It looks like you remove the Tour radiator end chrome covers and add the I/S radiator brackets. The I/S brackets have two holes in them to mount on the radiator. The issue is the Tour radiator only has one bolt hole.

For those that have crossed this path. Do you just mount that I/S bracket with the one bolt and that is good enough.

Craig

[Master Blaster]

Thats what I did.

[cef2lion]

Thanks for the reply. Did you put the I/S plastic shield in behind the radiator as well? If you added the shield can you tell if the PODS are deflecting heat out around you?

[DFragn]

I did the I/S Rad. pods on my Tourer.

The radiator I/S shroud is necessary to flow through the pods, if you want them functional, if you have it use it - if you don't consider getting one. The bike will run a bit warmer, but you'll run a little cooler. It's definitely noticeable.
It's a bear to install. I found using a couple of plastic putty knives (1.5") works well to assist the shroud past the nuts for the rack/stay bolts.