38 slow jets anybody use the aftermarket

[roadmap]

i got clogged jets now running bad.. to long in time between rebuild of float needles.. really poor idle and mid range one cylinder #2 not firing ( plug is though) others light in color not your normal brown.

http://www.jetsrus.com/a_jets_by_carburetor_type/jets_keihin_N424-26_slow_36-xxx.htm
 
http://www.rockymountainatvmc.com/p/43/53/213/930/-/-/196304/Pro-X-N424-26-Series-Keihin-Pilot-Jet-37.5?0&ref=gan&Attrs:1:AttrList=6102  this bran is a aftermarket cheap any luck using them on our beast.

http://carbjetkits.com/pilot-jets-n424-26.html --this one has no teley to contact them not good for me

either oem or aftermarket 25 or 45 cost could buy a complete extra set of aftermarket compared to oem keihin
 
what did you use i did allot of research to get these 3 links so any follow up on the jets would be great  i wrote a couple of times about my vaporlock already i put new float needle seats in they dried up waiting for parts

[offroadchevy806]

i got clogged jets now running bad.. to long in time between rebuild of float needles.. really poor idle and mid range one cylinder #2 not firing ( plug is though) others light in color not your normal brown.

http://www.jetsrus.com/a_jets_by_carburetor_type/jets_keihin_N424-26_slow_36-xxx.htm
 
http://www.rockymountainatvmc.com/p/43/53/213/930/-/-/196304/Pro-X-N424-26-Series-Keihin-Pilot-Jet-37.5?0&ref=gan&Attrs:1:AttrList=6102  this bran is a aftermarket cheap any luck using them on our beast.

http://carbjetkits.com/pilot-jets-n424-26.html --this one has no teley to contact them not good for me

either oem or aftermarket 25 or 45 cost could buy a complete extra set of aftermarket compared to oem keihin
 
what did you use i did allot of research to get these 3 links so any follow up on the jets would be great  i wrote a couple of times about my vaporlock already i put new float needle seats in they dried up waiting for parts

i have used the one from rockymountain, bike runs stronger, oh i also istalled the stage 1 kit from dyno jet and set my piolit screw 1 3/4 turns out from seated then synced the carbs    POWER HOUSE lol